Beer, Water, and Steam connections

a.The water supply pipe and steam pipe should comply with local standards.

b.Connect the cooling water inlet of the EB120 to the main water supply using a flexible hose with 3/4-inch fittings. Washing machine connection hoses are perfect for these connections, as they are made to withstand high pressure without bursting. We recommend braided stainless steel washing machine hoses, available at your local building supply store.

c.Connect the Cooling Water Out to the water input of the distillation. These connections should also be made with either rigid copper pipe (at least ½ dia), or flexible washing machine hoses.

d.Steam outlet (3/4 inch) use the same dimension Stainless Steel or Copper pipe to connect to the Distillation Column. During use the steam pipe will be very hot and must be protected against accidental contact. Note that according to the location it may be necessary to attach an additional length of pipe to the pressure relief valve in order to divert the steam flow to a safe direction should the valve operate.

e.Connect the drain outlet to a suitable drain via a copper pipe with the appropriate fittings.

Installation of controller and temperature probe.

EB-A controller is waterproof and can be installed anywhere within close proximity of the distillation system.

(1)Ideally the control panel should be installed at a height of approximately 5’for ease of use.

(2)Installation method: drill a 1.5”(40mm) hole on mounting surface. Open the front cover of steam EB120 and connect the control cable (6 pin) and temperature sensor cable (2 pin) to the relevant ports.

(3)Control panel installation: connect one end of the control cable to circuit board port in the boiler, and connect the other end to the controller.

(4)Temperature probe installation: the temperature probe is installed into the distillation column at the control temperature point. This varies according to the size and type of still being used. This probe would be installed in the location normally used for a dial thermometer. The temperature probe has ½” male FIP fittings.

EB120 Advanced Ethanol Boiler

EB120 specifications

The Allard EB120 is a distinctive sports car that hails from the Swedish automotive company Allard. Renowned for its performance-oriented design and powerful heritage, the EB120 captures the essence of classic European sports cars while integrating modern technology and engineering. This unique vehicle stands out not only for its sleek aesthetics but also for its impressive specifications.

Under the hood, the EB120 is powered by a robust engine that delivers exhilarating performance. Equipped with a 5.0-liter V8 engine, the car produces an impressive output, allowing it to accelerate from 0 to 60 miles per hour in a matter of seconds. The engine is finely tuned to provide a seamless driving experience, striking a perfect balance between power and efficiency.

One of the key features that define the EB120 is its lightweight construction. The chassis is designed using advanced materials, including reinforced steel and carbon fiber, which contribute to the car’s agility and responsiveness. This combination not only enhances performance but also improves fuel efficiency, making the EB120 a practical choice for enthusiasts who desire speed without compromising on economy.

The Allard EB120 also boasts cutting-edge aerodynamics, with a streamlined profile that minimizes drag and maximizes downforce. This design aspect not only enhances stability at high speeds but also contributes to improved handling and cornering capabilities. The car is equipped with an advanced suspension system, featuring adjustable dampers that allow drivers to customize their ride based on personal preferences and driving conditions.

In terms of technology, the EB120 incorporates modern infotainment systems that keep drivers connected and entertained. The interior is designed with luxury and comfort in mind, featuring high-quality materials and ergonomic seats. State-of-the-art sound systems and intuitive controls ensure that every journey in the EB120 is enjoyable.

Safety features are also a priority, with multiple airbags, advanced braking systems, and traction control systems that work seamlessly to provide a secure driving experience. The Allard EB120 is not just about speed; it is a well-rounded vehicle that considers the holistic needs of the driver and passengers.

In summary, the Allard EB120 is a remarkable sports car characterized by its powerful V8 engine, lightweight construction, and advanced aerodynamics. A blend of luxury and performance, it represents a significant achievement in automotive engineering, appealing to both traditional car enthusiasts and modern drivers alike.