Setting Time and Control Temperature

drain valve opens (drain indicator LED green).

(9)You can also drain the boiler manually by pressing the drain key when the system has stopped heating. The drain indicator LED will indicate as red during this operation.

(10)Once you have set the temperature required, the boiler will operate on all heating elements until the temperature is 4 degrees below the target temperature. Once the system is in full operation, the computer maintains the boiler temperature and it will selectively turn on or off heating elements as required. This approach helps to minimize the power consumption during operation.

(11)The pump switch on the remote operates a relay on the EB120 circuit board. This can be used to control an external pump in your system. The maximum voltage that can be used through this relay is 120V, 5A.

(12)Use the Enter key to change the temperature display between ℃ and ℉ and also to confirm the time and temperature setting.

Setting Time and Control Temperature

When the EB120 leaves the factory the default settings are 173 degrees Fahrenheit and 4 hours of operation. These can be adjusted as follows;

(1)Time setting : press “set” key – the time display will flash - press “△”,”▽” to adjust the time, each press will increase or reduce 5 minutes. Once the desired setting is reached, press “enter” to accept, and the time display will stop flashing. You can adjust from the time from 15 to 240 minutes, or operate the unit with no time limitations or continuously. Note the controller has a memory function, and if the power cord is not disconnected, the next time you turn on EB120, the time you selected will be the default time.

(2)Temperature setting: if you press “set” once after you finish setting the time or otherwise twice the temperature display will flash, enter the required temperature by pressing “△”,”▽” to adjust - every press will increase or reduce 1 degree. Once the required temperature has been set, press the “enter” key and the temperature display will stop flashing.

Steam on Demand function

To activate the steam on demand function, first preset the desired control temperature as described above, then press and hold the drain key for 5 seconds, L4 will turn red and the time displays “LONG” indicating that steam on demand is operational.

Once the steam on demand function has started, the unit will operate for 30 minutes, and then stop until the function is started again.

Note that the auto drain function will operate every time the steam stops.

Adjusting the water flow control for the cooling coils in your distillation column

EB120 Advanced Ethanol Boiler

EB120 specifications

The Allard EB120 is a distinctive sports car that hails from the Swedish automotive company Allard. Renowned for its performance-oriented design and powerful heritage, the EB120 captures the essence of classic European sports cars while integrating modern technology and engineering. This unique vehicle stands out not only for its sleek aesthetics but also for its impressive specifications.

Under the hood, the EB120 is powered by a robust engine that delivers exhilarating performance. Equipped with a 5.0-liter V8 engine, the car produces an impressive output, allowing it to accelerate from 0 to 60 miles per hour in a matter of seconds. The engine is finely tuned to provide a seamless driving experience, striking a perfect balance between power and efficiency.

One of the key features that define the EB120 is its lightweight construction. The chassis is designed using advanced materials, including reinforced steel and carbon fiber, which contribute to the car’s agility and responsiveness. This combination not only enhances performance but also improves fuel efficiency, making the EB120 a practical choice for enthusiasts who desire speed without compromising on economy.

The Allard EB120 also boasts cutting-edge aerodynamics, with a streamlined profile that minimizes drag and maximizes downforce. This design aspect not only enhances stability at high speeds but also contributes to improved handling and cornering capabilities. The car is equipped with an advanced suspension system, featuring adjustable dampers that allow drivers to customize their ride based on personal preferences and driving conditions.

In terms of technology, the EB120 incorporates modern infotainment systems that keep drivers connected and entertained. The interior is designed with luxury and comfort in mind, featuring high-quality materials and ergonomic seats. State-of-the-art sound systems and intuitive controls ensure that every journey in the EB120 is enjoyable.

Safety features are also a priority, with multiple airbags, advanced braking systems, and traction control systems that work seamlessly to provide a secure driving experience. The Allard EB120 is not just about speed; it is a well-rounded vehicle that considers the holistic needs of the driver and passengers.

In summary, the Allard EB120 is a remarkable sports car characterized by its powerful V8 engine, lightweight construction, and advanced aerodynamics. A blend of luxury and performance, it represents a significant achievement in automotive engineering, appealing to both traditional car enthusiasts and modern drivers alike.