Allard EB120 manual Chapter Four Testing and operation

Page 8

EB120 Circuit Board

Chapter Four : Testing and operation

(1)Once the installation has been completed and checked, turn on power and water supplies and carry out the following test.

(2)On the control panel press the on/off key, (the key has a time-lapse function, press it for I second), the time and temp displays the data.

(3)Turn on your valve(s) to allow beer to flow to the boiler. The indicator LED is red on the remote. The internal pump will begin filling the boiler with beer. When the beer level rises to the low beer level sensor level the elements switch on and the heating indicator LED turns on. Several seconds later when the high beer level sensor is reached, the internal pump will stop, and the indicator LED changes to green.

(4)After a few minutes of heating, the unit will begin producing steam.

(5)Press the on/off key again to turn off the system. There will be no data on display and the boiler will stop.

(6)Press the on/off key once more (temp and time display again), and after a few seconds the boiler will begin producing steam again. Let the boiler operate for a short while - the beer level will fall to the low beer level. Check that the internal pump automatically starts (the pump indicator LED (L1) becomes red). The pump indicator LED will go back to green when the boiler tank is full.

(7)The time display counts down to show the remaining time, when it reaches 0 the boiler will stop heating. The run time can be adjusted, or overridden to run continuously.

(8)5 minutes after the system has been turned off, it will automatically go into the drain-down cycle. The

EB120 Advanced Ethanol Boiler

8

Image 8
Contents EB120 Foreword Chapter One Chapter Two The EB120 Advanced Ethanol BoilerParts description of EB-A controller Chapter Three Installation Installation of controller and temperature probe Beer, Water, and Steam connectionsEB120 Advanced Ethanol Boiler Chapter Four Testing and operation Setting Time and Control Temperature Steam on Demand functionChapter Five Troubleshooting guide Chapter Six Regular Use and Maintenance Warranty

EB120 specifications

The Allard EB120 is a distinctive sports car that hails from the Swedish automotive company Allard. Renowned for its performance-oriented design and powerful heritage, the EB120 captures the essence of classic European sports cars while integrating modern technology and engineering. This unique vehicle stands out not only for its sleek aesthetics but also for its impressive specifications.

Under the hood, the EB120 is powered by a robust engine that delivers exhilarating performance. Equipped with a 5.0-liter V8 engine, the car produces an impressive output, allowing it to accelerate from 0 to 60 miles per hour in a matter of seconds. The engine is finely tuned to provide a seamless driving experience, striking a perfect balance between power and efficiency.

One of the key features that define the EB120 is its lightweight construction. The chassis is designed using advanced materials, including reinforced steel and carbon fiber, which contribute to the car’s agility and responsiveness. This combination not only enhances performance but also improves fuel efficiency, making the EB120 a practical choice for enthusiasts who desire speed without compromising on economy.

The Allard EB120 also boasts cutting-edge aerodynamics, with a streamlined profile that minimizes drag and maximizes downforce. This design aspect not only enhances stability at high speeds but also contributes to improved handling and cornering capabilities. The car is equipped with an advanced suspension system, featuring adjustable dampers that allow drivers to customize their ride based on personal preferences and driving conditions.

In terms of technology, the EB120 incorporates modern infotainment systems that keep drivers connected and entertained. The interior is designed with luxury and comfort in mind, featuring high-quality materials and ergonomic seats. State-of-the-art sound systems and intuitive controls ensure that every journey in the EB120 is enjoyable.

Safety features are also a priority, with multiple airbags, advanced braking systems, and traction control systems that work seamlessly to provide a secure driving experience. The Allard EB120 is not just about speed; it is a well-rounded vehicle that considers the holistic needs of the driver and passengers.

In summary, the Allard EB120 is a remarkable sports car characterized by its powerful V8 engine, lightweight construction, and advanced aerodynamics. A blend of luxury and performance, it represents a significant achievement in automotive engineering, appealing to both traditional car enthusiasts and modern drivers alike.