Desa RCCP80V owner manual Installation, Operation, To Start Heater

Page 4

4

INSTALLATION OPERATION

To Start Heater

INSTALLATION

WARNING: Review and understand the warnings in the Safety Information section, page 2. They are needed to safely operate this heater. Follow all local codes when using this heater.

WARNING: Test all gas piping and connections for leaks after installation or servicing. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

1.Provide propane supply system (see Propane Supply, page 3).

2.Connect fuel gas fitting on hose/regulator assembly to pro- pane tank(s). Turn fuel gas fitting counterclockwise into threads on tank. Tighten firmly using a wrench. IMPORTANT: Tighten regulator with vent pointing down (see Figure 3). Pointing vent down protects regulator from weather damage.

3.Connect hose to the valve inlet. Tighten firmly using wrench. You must use the regulator supplied with heater.

4.Open propane supply valve on propane tank(s) slowly. Note: if not opened slowly, excess-flow check valve on propane tank may stop gas flow. If this happens, you may hear a click inside the regulator assembly, this is the check valve closing. To re- set the excess-flow check valve, close propane supply valve and open it again slowly.

5.Check all connections for leaks. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak that must be corrected.

6.Close propane supply valve.

 

Fuel Gas Fitting

Propane

 

Supply Valve

Hose

 

Regulator

 

Vent

 

(pointing down)

Valve Inlet

OFF

 

LO

HI

 

MED

 

Hose

Figure 3 - Hose and Valve Inlet

OPERATION

WARNING: Review and understand the warnings in the Safety Information section, page 2. They are needed to safely operate this heater. Follow all local codes when using this heater.

TO START HEATER

1.Follow all installation, ventilation, and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow on heater.

3.Make sure unit is turned off by slightly depressing and turning control knob fully clockwise to "OFF".

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on pro- pane tank may stop gas flow. If this happens, you may hear a click inside the regulator assembly, this is the check valve clos- ing. To reset the excess-flow check valve, close propane sup- ply valve and open it again slowly.

5.Slightly depress and turn control knob counterclockwise to the low position (see Figure 4).

6.With the control knob pushed all the way in, press and release the peizo ignitor button. Keep pressing piezo ignitor button until the burner lights. Hold control knob down for a maxi- mum of 15 seconds while attempting ignition. If heater does not ignite, release control knob and wait 3 minutes before at- tempting reignition.

Propane Tank

Figure 2 - Regulator With Vent Pointing Down

Continue Turning Knob

Counterclockwise to

MED and HI

Piezo Ignitor Button

Off Low

Position Position

 

 

OF

F

 

 

 

OF

HI

LO

F

 

M

ED

HI

LO

ED

 

 

 

M

OFF

 

LO

HI

MED

 

Control Knob

Figure 4 - Control Knob, and Piezo Ignitor Button Locations

For morevisit www..com

104781-01D

Image 4
Contents Table of Contents Canadian Propane Construction HeaterSafety Information Product Identification UnpackingTheory of Operation Propane SupplyOperation InstallationTo Start Heater Storage Flame PatternsTo Stop Heater To Restart HeaterMaintenance Replacement PartsSpecifications Parts Under WarrantyTroubleshooting AccessoriesIllustrated Parts Breakdown RCCP80VParts List KEY Part Description QTY104781-01D Owners Registration Form Postage Required PROPANE/LP Forced AIR Heaters PROPANE/LP Convection Heaters GAS ChimeneasWarranty and Repair Service Table DES Matières Informations Concernant LA Sécurité AvertissementsDéballage Principe DE FonctionnementIdentification DU Produit Alimentation EN PropaneMise EN Marche Détendeur avec aérateur dirigé vers le basAspect DE LA Flamme Aspect correct de la flammeRemisage EntretienCaractéristiques Arrêt DE L’APPAREILAccessoires DépannageDécomposition Illustrées DES Pièces Liste DES Pièces Pièces DétachéesPièces Sous Garantie Pièces NON Couvertes PAR LA Garantie104781-01D Formulaire Dinscription DU Propriétaire Ruban Autres Produits DE Chauffage Pour L’EXTÉRIEUR Garantie ET Service APRÈS-VENTE

RCCP80V specifications

The Desa RCCP80V is a cutting-edge portable propane heater designed to deliver efficient and reliable heating in various applications. Renowned for its robust construction and advanced technology, the RCCP80V is ideal for outdoor gatherings, construction sites, garages, and emergency heat during power outages.

One of the main features of the Desa RCCP80V is its impressive heating capacity. With an output of 80,000 BTUs, this heater is capable of warming up to 2,000 square feet, making it suitable for both residential and commercial spaces. The adjustable heat settings allow users to customize the temperature according to their needs, ensuring maximum comfort.

The RCCP80V incorporates a variety of advanced technologies that enhance its performance and safety. It features an integrated safety shut-off system that automatically turns off the heater in the event of accidental tip-over, providing peace of mind during operation. Additionally, the heater is equipped with an oxygen depletion sensor that detects low oxygen levels in the air and triggers an automatic shut-off, ensuring safe usage in enclosed spaces.

Portability is another significant advantage of the Desa RCCP80V. The unit is designed with a compact and lightweight framework, making it easy to transport to different locations. Its durable construction means it can withstand harsh conditions and frequent mobility without compromising performance.

The heater also comes with a variable heat control knob that allows for precise temperature regulation. This feature enables users to maintain the desired warmth without wasting fuel, enhancing both efficiency and cost-effectiveness. The RCCP80V is compatible with standard 20-pound propane tanks, providing convenience and accessibility for refueling.

In terms of design, the Desa RCCP80V features a modern aesthetic, combining functionality with a sleek appearance that fits seamlessly into various environments. Its easy-to-use ignition system ensures quick and hassle-free startup, making it an excellent choice for those seeking immediate warmth.

Overall, the Desa RCCP80V stands out in the portable heater market due to its impressive heating capacity, safety features, portability, and efficient fuel usage. Whether for outdoor events, job sites, or emergency situations, the RCCP80V is a reliable choice for anyone in need of effective heating solutions.