Desa RCCP80V owner manual Maintenance, Replacement Parts, Specifications, Parts Under Warranty

6

MAINTENANCE SPECIFICATIONS REPLACEMENT PARTS

MAINTENANCE

WARNING:

•Never attempt to service heater while it is con- nected to propane supply, operating, or hot. Se- vere burns can occur.

•Keep heater clear and free from combustible mate- rials, gasoline, and other flammable vapors and liquids.

•Do not block the flow of combustion or ventilation air.

1.Keep heater clean. Clean heater annually or as needed to re- move dust and debris. If heater is dirty or dusty, clean heater with a damp cloth. Use household cleaners on difficult spots.

2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak. Correct all leaks at once.

3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace.

4.Have heater inspected yearly by a qualified service agency.

REPLACEMENT PARTS

WARNING: Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use generic parts. Improper replace- ment parts could cause serious or fatal injuries. This will also protect your warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA Industries at 1-905-826-8010.

When calling DESA Industries, have ready:

•your name and address

•model and serial numbers of your heater

•how heater was malfunctioning

•purchase date

In most cases, we will ask you to return the part to the factory.

SPECIFICATIONS

Rating (Btu/Hr)
High	80,000
Low	40,000
Fuel	Propane Vapor Only
Fuel Consumption
Liters (Gallons)/Hour	1.67 (0.44) minimum

3.3(0.87) maximum Kilogram (Pounds)/Hour 0.84 (1.86) minimum

1.7(3.71) maximum

Supply Pressure To Regulator (for input adjustment)

Maximum	1380 kPa (200 psi)
Minimum	138 kPa (20 psi)
Manifold Pressure (W.C.)
High	45.7 cm (18 in)
Low	60 cm (23.8 in)
Ignitor Gap	5.0 mm (0.195 in)
Weight
Heater Weight	6 kg (13 lbs)
Shipping Weight	7.7 kg (17 lbs)
Size - L x W x H	51 x 38.1 x 40.6 cm (20 x 15 x 16 in)
Minimum Temperature	-29 °C (-20° F)
	Surrounding Air Temperature

PARTS NOT UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA Industries at 1-905-826-8010.

When calling DESA Industries, have ready:

•model and serial numbers of your heater

•the replacement part number

For morevisit www..com

104781-01D