Desa installation manual Infrared VENT-FREE Natural GAS Heater, Models VN6C and VN10

Page 1

®

INFRARED VENT-FREE NATURAL GAS HEATER

OWNER’S OPERATION AND INSTALLATION MANUAL

®

MODELS: VN6C AND VN10

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING: This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion must be provided. Refer to page 3 of this manual.

This appliance may be installed in an aftermarket* manufactured (mobile) home, where not prohibited by state or local codes.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

Save this manual for future reference.

Image 1
Contents Models VN6C and VN10 Infrared VENT-FREE Natural GAS HeaterVanguard VN6C and VN10 Natural GAS Heater Safety InformationProduct Identification Product FeaturesAIR for Combustion and Ventilation Local CodesDetermining FRESH-AIR Flow for Heater Location Unusually Tight ConstructionConfined and Unconfined Space Determining if You Have a Confined or Unconfined SpaceVentilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Installation Items Installing to WallInstalling Heater to Wall Check GAS TypeInstalling Bottom Mounting Screw Installing TWO Mounting ScrewsPlacing Heater on Mounting Screws Removing Front Panel of HeaterGas Connection Connecting to GAS SupplyOperating Checking GAS ConnectionsHeater Lighting Instructions Operating HeaterTo Select Heating Level To Turn OFF GAS To ApplianceInspecting Burner Cleaning and MaintenanceObserved Problem Possible Cause Remedy TroubleshootingTroubleshooting Gas leak. See Warning statement be Service Publications Replacement Parts Technical ServiceSpecifications Service HintsVN6C Parts ListVN10 Vanguard VN6C and VN10 Natural GAS Heater 101851 Warranty Information