Stereo Audio System for Your iPod | V11M11_IM_EN_12082006 |
OPERATIONAL INSTRUCTIONS
Example (TX Mode): If you have a Stereo Headset with Bluetooth technology (Mono will not work, only stereo headphone with A2DP Bluetooth profile will work) , you can set the BluePinTM to Transmit(TX) the music that is currently playing on i277 to the headphone.
NOTE: Certain Headsets with Bluetooth technology are not compatible with the BluePinTM, please check with your dealer for compatibility. The best product for this operation is iLUV Stereo Headset with Bluetooth technology, which is fully compatible with BluePinTM. Devices with Bluetooth technology you are trying to pair MUST support A2DP Profile.
7.To pair with cell phones, PDA, or other devices with the BluePinTM (RX Mode):
•First connect the BluePinTM to i277’s BluePinTM port.
•Push and hold the pairing button until button displays blue and red light flashing.
•From your cell phone or other devices, go to Bluetooth setup in the devices menu. Depending on the devices menu will differ.
•Do a search for devices, when initiated your device will look for any devices with Bluetooth technology in the area.
•When the search is done you will see a device named
•The default password for our BluePinTM unit is “0000”, enter password and your device will let you know if pairing was successful.
•Once connected, you will be able to play the songs from MP3 cell phones or other devices with Bluetooth technology and hear it from our i277 unit.
•You can use the PLAY/PAUSE, PREV, NEXT buttons of i277 to remote control the MP3 cell phones or other devices that support AVRCP profile.
Note: Depends on the device these functions might be disabled due to software issues.
- 22 - |