England's Stove Works 55TRPAH, 25PAH, 55SHPAH manual Replacing Components

REPLACING COMPONENTS

IMPROPER GASKET MAINTENANCE, INCLUDING FAILURE TO REPLACE

GASKETS, CAN CAUSE AIR LEAKS RESULTING IN SMOKE-BACKS.

Gaskets

1.Door

oThis unit comes with a 5/8” rope gasket around the door that should be replaced at least every two years. To replace the door gasket (Part # AC‐DGKNC), the old gasket must first be removed entirely — prior to adding the new adhesive, you may have to scrape the old cement from the door channel. Once the cement and gasket have been added, the door should be closed and latched for twenty‐four hours to allow the cement to harden.

2.Window

oIf you are replacing the window gasket (Part # AC‐GGK), the new gasket will already have adhesive on one side. Remove the paper on the adhesive side and place the gasket around the outside edge of the glass, centered over the edge. Fold the gasket edges over on the glass, forming a “U” shape.

3.Combustion Blower

oThe Combustion Blower Gasket (Part # PU‐CBG) should be inspected whenever you remove or clean the Combustion Blower and replaced if necessary.

4.Combustion Blower Motor

oThe combustion blower motor gasket (Part # PU‐CMG) generally does not need replacement, as it not normally removed from the unit. However, if the exhaust blower is cleaned by removing the motor, rather than the entire blower assembly, this gasket must be inspected and replaced as necessary.

Finish

This new unit has been painted with High‐Temperature Paint that should retain its original look for years. If the unit should get wet and rust spots appear, the spots can be sanded with fine steel wool and repainted. It is crucial that only High‐Temperature Spray Paint is used (Part # AC‐MBSP), as others may not adhere to the surface or withstand the high temperatures. Similarly, some brands of paint will not adhere to different brands of paint, so we highly recommend using our proprietary High‐Temperature Spray Paint.

Page 35