Installation

Venting Introduction

This pellet stove operates on a negative draft system, which pulls combustion air through the burn pot and pushes the exhaust air through the vent pipe and out of the building. This unit must be installed in accordance with the following detailed descriptions of venting techniques; not installing the stove in accordance with the details listed here can result in poor stove performance, property damage, bodily injury or death. England’s Stove Works is not responsible for any damage incurred due to a poor or unsafe installation.

If questions arise pertaining to the safe installation of the stove, our Technical Support line (800‐245‐6489) is available. Contact your local code official to be certain your installation meets local and national fire codes and if you’re uncertain about how to safely install the stove, we strongly recommend contacting a local NFI certified installer to perform the installation.

Venting Guidelines

ALWAYS install vent pipe in strict adherence with the instructions and clearances included with your venting system.

DO NOT connect this pellet stove to a chimney flue which also serves another appliance.

DO NOT install a flue pipe damper or any other restrictive device in the exhaust venting system of this unit.

USE an approved wall thimble when passing through a wall and a ceiling support/fire stop when passing through a ceiling.

ONLY use 3.0” or 4.0” Type L or Type PL pipe approved for pellet stove venting; DO NOT use galvanized or B‐Vent pipe.

SEAL each joint of pellet vent with high temperature silicone (Part # AC‐RTV3) to prevent smoke spillage into the home.

AVOID excessive horizontal runs and elbows, as both will reduce the draft of the venting system and will result in poor stove performance.

INCLUDE as much vertical pipe as possible to prevent smoke from the unit from entering your home in the event of a power outage.

INSPECT your venting system often, to be certain it is clear of fly‐ash and other restrictions.

CLEAN the venting system as detailed in the maintenance section of this manual.

WARNING

INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENT MANUFACTURER.

HOT! Do not touch! Severe burns or clothing ignition may result.

Glass and other surfaces are hot during operation.

WARNING: Venting system surfaces get HOT, and can cause burns if touched.

Noncombustible shielding or guards may be required.

Page 8

25PAH, 55SHPAH, 55TRPAH specifications

England's Stove Works has long been a name synonymous with quality and reliability in the world of wood and pellet stoves. Among their impressive lineup, the 55TRPAH, 55SHPAH, and 25PAH models stand out for their innovative features, efficiency, and effective heating capabilities.

The 55TRPAH model is a premier pellet stove that boasts a striking combination of performance and eco-friendliness. Its impressive heating capabilities make it suitable for larger spaces, providing warmth in a highly efficient manner. One of the standout features of the 55TRPAH is its large hopper capacity, allowing for extended burn times and less frequent refueling. This model is equipped with an automatic ignition system and a programmable thermostat, offering convenience and ease of use for homeowners. The simplicity of its design is matched by its efficiency, with a combustion efficiency rating that ensures minimal emissions and a smaller environmental footprint.

In the same vein, the 55SHPAH pellet stove offers a unique blend of style and functionality. Designed for those who appreciate aesthetics alongside performance, the 55SHPAH features a modern look, making it a fitting addition to any home decor. This model also comes standard with a high-efficiency heat exchanger, maximizing heat output while minimizing energy waste. Moreover, the 55SHPAH includes an advanced airwash system, ensuring that the glass remains clean for a clear view of the beautiful flames, adding to the overall ambiance of any room.

The 25PAH is tailored for smaller spaces without compromising on performance. This compact yet powerful model is perfect for those looking to effectively heat a smaller area. The 25PAH features a robust construction that ensures durability and longevity. Its user-friendly control panel allows for easy adjustments and fine-tuning of the heating settings. Additionally, this model is designed with a focus on efficiency, boasting EPA certification for its low emissions and high efficiency.

In conclusion, England's Stove Works offers a range of pellet stoves that cater to various heating needs. The 55TRPAH, 55SHPAH, and 25PAH models are reflective of the brand’s commitment to quality, efficiency, and user satisfaction. Each model combines innovative technologies and thoughtful design to deliver reliable heating solutions while being mindful of the environment. Whether you have a large or small space, England's Stove Works ensures there is a pellet stove that meets your needs, providing warmth and comfort throughout the colder months.