England's Stove Works 25PAH, 55SHPAH, 55TRPAH specification

INSTALLATION

Approved Venting Method 3: Existing Chimney System

Using an existing masonry or factory built chimney for venting is the only other acceptable method for venting this pellet unit.

Use Type L or Type PL venting pipe until entering the existing chimney. Use the appropriately sized adapter when transitioning from the pellet vent pipe to the masonry or factory built thimble and be certain that the adapter is sealed tightly to both the pellet venting system and the existing chimney.

Before using an existing chimney, be certain it is in good condition (A chimney sweep inspection is highly recommended). Also, make sure the chimney meets the minimum standards listed in NFPA 211 (A chimney professional can confirm this upon inspection).

If connecting this stove to a factory built chimney, it may ONLY be a 6” flue, UL103 HT venting system. Connection to any other factory built chimney may result in a poorly operating or dangerous stove

installation.

When connecting to an existing masonry chimney, the cross‐sectional area of the flue must be considered. A chimney with a flue larger than 6” round (28.27 sq. in.) may require relining with an approved pellet stove chimney lining system.

Use an appliance collar where the pellet vent connects to the exhaust output of the pellet stove and attach the appliance collar to the exhaust blower output using three sheet metal screws.

Seal each pipe connection joint with high temperature RTV Silicone, to ensure the system is leak free (Check with the specific pipe manufacturer’s instructions before doing so).

If the pellet vent pipe being used is not a “Twist Lock” system, three (3) sheet metal screws are required at each pipe joint.

Connect the pellet stove to outside combustion air using the kit included with your stove or using an alternative method, as described in the “Outside Air” section, on page 14.

Please Note:

Installation diagrams are for reference purposes only and are not drawn to scale, nor meant to be used as plans for each individual installation. Please follow all venting system requirements, maintain the required clearances to combustibles, and follow all local codes.

Page 12

For high altitude installations (above 4,000 ft.), the vent pipe should be

increased from 3-inch (3”) to four-inch (4”).

25PAH, 55SHPAH, 55TRPAH specifications

England's Stove Works has long been a name synonymous with quality and reliability in the world of wood and pellet stoves. Among their impressive lineup, the 55TRPAH, 55SHPAH, and 25PAH models stand out for their innovative features, efficiency, and effective heating capabilities.

The 55TRPAH model is a premier pellet stove that boasts a striking combination of performance and eco-friendliness. Its impressive heating capabilities make it suitable for larger spaces, providing warmth in a highly efficient manner. One of the standout features of the 55TRPAH is its large hopper capacity, allowing for extended burn times and less frequent refueling. This model is equipped with an automatic ignition system and a programmable thermostat, offering convenience and ease of use for homeowners. The simplicity of its design is matched by its efficiency, with a combustion efficiency rating that ensures minimal emissions and a smaller environmental footprint.

In the same vein, the 55SHPAH pellet stove offers a unique blend of style and functionality. Designed for those who appreciate aesthetics alongside performance, the 55SHPAH features a modern look, making it a fitting addition to any home decor. This model also comes standard with a high-efficiency heat exchanger, maximizing heat output while minimizing energy waste. Moreover, the 55SHPAH includes an advanced airwash system, ensuring that the glass remains clean for a clear view of the beautiful flames, adding to the overall ambiance of any room.

The 25PAH is tailored for smaller spaces without compromising on performance. This compact yet powerful model is perfect for those looking to effectively heat a smaller area. The 25PAH features a robust construction that ensures durability and longevity. Its user-friendly control panel allows for easy adjustments and fine-tuning of the heating settings. Additionally, this model is designed with a focus on efficiency, boasting EPA certification for its low emissions and high efficiency.

In conclusion, England's Stove Works offers a range of pellet stoves that cater to various heating needs. The 55TRPAH, 55SHPAH, and 25PAH models are reflective of the brand’s commitment to quality, efficiency, and user satisfaction. Each model combines innovative technologies and thoughtful design to deliver reliable heating solutions while being mindful of the environment. Whether you have a large or small space, England's Stove Works ensures there is a pellet stove that meets your needs, providing warmth and comfort throughout the colder months.