Introduction, I2H I3P | Burley G4237/8 specification

TRANSIT SCREW

INTRODUCTION

Thank you for choosing this burley product. All of our products carry a CE mark which is awarded by an independent test house (notified body) and shows the fires have been type tested to meet the essential requirements of the European Gas Appliance Directive and the appropriate British Standards.

This is a highly efficient Flueless Inset Live Fuel Effect Appliance. The burner system is very clean burning and a catalyst cleans the combustion products even further.

A thermostat in the burner control system adjusts heat output to maintain a room temperature, which can easily be set by the user. There is also a separate control to adjust the flame effect as required. Please demonstrate its operation to the customer before leaving.

An oxygen depletion sensing pilot light is also fitted and will sense any significant oxygen depletion in the room and shut the fire down safely.

1.APPLIANCE DATA

Refer to the appliance data (affixed beside control knob) ENSURE THAT THE LOCAL CONDITIONS OF USE CORRESPOND TO THE DATA ON THE BADGE

		Natural Gas G20	LPG (Propane) G31
Category		I2H	I3P
Supply Pressure		20mBar		37mBar
Inlet Pressure		20mBar*	37mBar*
Heat Input (net)	(High)	2.5kW	2.5kW	(180g/h)
	(Low)	1.5kW	1.5kW	(107g/h)
Inlet Connection		8mm Compression	8mm Compression
Injector	Manual Elbow 300		Elbow 90
	Remote Elbow 180		Elbow 85

*The inlet pressure must be within +/- 1mBar of specification with all gas appliances in the house switched on and also with just the Burley heater operating. If outside of this tolerance the fault is most likely to be in the installation pipe work or service governor at the meter. If the problem is the meter governor, this is the property of the gas service provider (such as Transco / National Grid 0800 111999 or Bord Gais) and they should be called to rectify this. The fire will not operate correctly if the pressures are incorrect.

2.UNPACKING THE APPLIANCE

2.1 Carefully examine the carton for damage before unpacking. If it is obviously damaged, consult the supplier over whether to proceed.

2.2 Make sure the carton is stood upright and open the top. Remove the cardboard top fitting, this can be used as a hearth protector when installing the fire.

2.3 Remove the fittings boxes contained within and open them and check the condition of the contents. Remove the fire and examine its general condition, paying particular attention to the decorative frame, the glass front and fire box flanges.

2.4 The fire case is attached to the chassis using clips and 2 transit screws in the lower rear of the case. These screws can be removed and discarded.

2.5If satisfied by the general condition, place the decorative

components to one side and proceed with the installation. If in any doubt, seek advice from the supplier. Read these instructions fully before proceeding even if you have fitted this model before.

- 2 -

G4237/8 specifications

The Burley G4237/8 is a remarkable addition to the line of high-performance bicycles designed for both seasoned cyclists and casual riders alike. Known for its engineering excellence and attention to detail, the G4237/8 combines innovative technologies with a sleek design to enhance the cycling experience.

One of the standout features of the Burley G4237/8 is its lightweight frame, crafted from high-grade aluminum alloy. This material not only adds durability but also ensures that the bike remains easy to handle and maneuver, making it a perfect choice for various terrains. The frame geometry is designed for comfort, providing an upright riding position that reduces strain during long rides and makes it suitable for both city commuting and off-road adventures.

The G4237/8 is equipped with advanced suspension technology, improving shock absorption and ride quality. Whether tackling rocky paths or navigating through city streets, the bike maintains stability and control, providing a smooth experience. Additionally, the suspension system is adjustable, allowing the rider to personalize the bike's response based on their preferences or riding conditions.

Another attractive feature is the bicycle's integrated braking system. The Burley G4237/8 utilizes hydraulic disc brakes, known for their reliability and consistent performance, regardless of weather conditions. This means that riders can expect precise stopping power, enhancing safety during descents or in emergency situations.

The Burley G4237/8 is also outfitted with a user-friendly gear system that simplifies shifting. The gear ratios provide a broad spectrum of options, making it easy to tackle diverse landscapes effortlessly. Riders can transition smoothly from steep inclines to flat roads without losing momentum.

In terms of aesthetics, the Burley G4237/8 does not compromise. The bike features a modern design with a selection of vivid color options, ensuring that riders not only enjoy performance but also look stylish while doing so.

Overall, the Burley G4237/8 stands out due to its combination of lightweight construction, innovative suspension, reliable braking technology, and user-friendly gear options. This bike is designed to meet the needs of a wide range of cyclists, offering the perfect blend of comfort, safety, and style, making it an outstanding choice for anyone seeking an exceptional riding experience.