Remote Controlled Heaters | Burley G4237/8 guide

9.0 TO LIGHT THE HEATER

BEFORE LIGHTING. IF THE PIPES HAVE NOT BEEN PURGED OF DEBRIS, DO SO NOW BEFORE LIGHTING THE FIRE. FAILURE TO DO SO WILL RESULT IN BLOCKAGES WITHIN THE PILOT.

BURLEY APPLIANCES IS THE ONLY COMPANY TO BENCH RUN AND THOROUGHLY TEST EVERY SINGLE GAS FIRE IT PRODUCES. BURLEY IS IN THE UNIQUE POSITION OF KNOWING THAT EVERY APPLIANCE LEAVES THE FACTORY IN PERFECT WORKING ORDER.

MANUAL CONTROLLED HEATERS

9.1There are 2 control knobs on the appliance. The left hand one (coloured red) controls On / Off and High / Low flame. The right hand one (coloured black) is the comfort level thermostat which turns the fire down to pilot only once the desired temperature is reached. Some people prefer to retain a flame effect using the left hand red knob to control its height whilst keeping the thermostat black knob set on hot. Others prefer to use the fire purely

as a heater in which case they will

select a flame height on the red knob then set the thermostat black knob to a comfort level. In both cases if the room gets too hot, the thermostat will automatically reduce the fire to pilot setting until the room cools.

If during use the pilot is alight but the main burner will not light, check

the thermostat position and if necessary select a warmer setting.

9.2To light the fire, first ensure the red knob is turned clockwise to OFF. Press the left hand (red) control knob for several seconds then turn slowly anticlockwise to the ignition position. A click will be heard and the pilot (under right side of fuel bed) should light. If it does not, repeat the operation a few times to purge any air in the pipe. Continue to hold knob for 15 – 20 second to establish the pilot and then release. If pilot fails to establish, turn off, wait 1 minute then repeat lighting procedure. Rotate the red knob to high flame to light then back to the desired flame position. If no gas comes through rotate the black knob (thermostat) to a hotter room setting and the fire will light.

9.3Control the fire by a combination of thermostat and / or flame setting to suit your mode of use (see 9.1)

9.4To turn the fire off, rotate the left-hand knob fully clockwise back to a vertical position.

9.5REMOTE CONTROLLED HEATERS

Ensure the toggle switch behind the fret ash pan door is switched to the ON position. On first operation, ensure the thermostat is set to the hot position.

Ensure the infra red sensor is visible. The fire relies on line of sight between the sensor and handset to operate. If a different fret is fitted it is possible to swivel and slide the sensor into a clearer position. In the event of the fire not working check both of the above points before calling an engineer.

To ignite the fire point the handset at the fire, push and hold simultaneously the 2 left hand buttons marked * and ● for several seconds until the ignition sequence begins. The fire will

- 9 -

G4237/8 specifications

The Burley G4237/8 is a remarkable addition to the line of high-performance bicycles designed for both seasoned cyclists and casual riders alike. Known for its engineering excellence and attention to detail, the G4237/8 combines innovative technologies with a sleek design to enhance the cycling experience.

One of the standout features of the Burley G4237/8 is its lightweight frame, crafted from high-grade aluminum alloy. This material not only adds durability but also ensures that the bike remains easy to handle and maneuver, making it a perfect choice for various terrains. The frame geometry is designed for comfort, providing an upright riding position that reduces strain during long rides and makes it suitable for both city commuting and off-road adventures.

The G4237/8 is equipped with advanced suspension technology, improving shock absorption and ride quality. Whether tackling rocky paths or navigating through city streets, the bike maintains stability and control, providing a smooth experience. Additionally, the suspension system is adjustable, allowing the rider to personalize the bike's response based on their preferences or riding conditions.

Another attractive feature is the bicycle's integrated braking system. The Burley G4237/8 utilizes hydraulic disc brakes, known for their reliability and consistent performance, regardless of weather conditions. This means that riders can expect precise stopping power, enhancing safety during descents or in emergency situations.

The Burley G4237/8 is also outfitted with a user-friendly gear system that simplifies shifting. The gear ratios provide a broad spectrum of options, making it easy to tackle diverse landscapes effortlessly. Riders can transition smoothly from steep inclines to flat roads without losing momentum.

In terms of aesthetics, the Burley G4237/8 does not compromise. The bike features a modern design with a selection of vivid color options, ensuring that riders not only enjoy performance but also look stylish while doing so.

Overall, the Burley G4237/8 stands out due to its combination of lightweight construction, innovative suspension, reliable braking technology, and user-friendly gear options. This bike is designed to meet the needs of a wide range of cyclists, offering the perfect blend of comfort, safety, and style, making it an outstanding choice for anyone seeking an exceptional riding experience.