Burley G4237/8 warranty 632mm 197mm 590mm

Page 5

ensure there is no possibility of them touching the appliance.

632mm

197mm

590mm

Overall dimensions are as shown.

Hearths - For hearth mounting (or if the fire is less than 200mm above the ground) then the hearth must protrude at least 100mm in front of the fire and 50mm to either side. A minimum hearth of 732mm wide x 300mm deep is required, the hearth must be a minimum of 12mm thick and be of a non combustible material. The surface on which the appliance is to stand must be flat, level and square to the back panel. Failure to observe this could result in the appliance leaning away from the fireplace.

If the appliance is fitted on the wall, more than 200mm above the ground then a hearth is not required.

Chimneys & under grate draught devices – To prevent draught from affecting the stability of the appliance flames, all chimney openings and undergrate draught devices within 1 metre of the fire must be blocked off.

Fixing - The appliance should be secured to the wall using the fixing brackets on the flange of the appliance. If it is to be mounted above the ground, care should be taken to ensure the wall is able to take the weight of the appliance and that the fixings are of the correct type. Use all 6 screw holes in the brackets to attach to the wall.

If the appliance is hearth mounted the fixing is intended to prevent the appliance from moving / toppling and it is permissible just to use 2 holes in the wall brackets or to drill through the appliance base and screw it to the floor.

Do not fix the appliance directly to plasterboard as prolonged exposure to heat could affect it or the vapour layer behind. A layer of heat resistant board should be screwed to the wall instead.

Fully purge pipes of air and any debris and connect the gas supply to the 8mm elbow on the fire. Leak test the supply using an approved method. Note: An isolating valve must be situated near the

applianceforservicing. Site the thermostat at a suitable position where it will sense the room temperature.

The case can be test fitted to the chassis to ensure clearance. The gap in the case top between grille and spacer slides over the top flange on the appliance. The bottom of the case has folded out brackets that slide over cut outs in the appliance chassis.

The door on the appliance is secured with a magnet and it may be necessary to adjust the strength of the magnets grip. This can be done by bending the magnet holding bracket in or out to adjust.

Remove case and place to one side.

- 5 -

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refer to Rating Label Burley G4237/8 ImageI2H I3P IntroductionPreparing the Appliance General RequirementsInstallation Methods Installation Instructions632mm 197mm 590mm Method TWO Inset on Hearth or Inset Wall Mounted Servicing Pebble / Coal Layout ReassemblyReversible Side Cheeks Remote Controlled Heaters Commissioning Spark FailureThermostat Oxygen Depletion Pilot SystemFirefronts Completion of Warranty CardFireguards Servicing InstructionsUser Instructions USE only Genuine Replacement PartsManual Controlled Heaters To Light the HeaterRemote Controlled Fire Batteries General Cleaning and Maintenance

G4237/8 specifications

The Burley G4237/8 is a remarkable addition to the line of high-performance bicycles designed for both seasoned cyclists and casual riders alike. Known for its engineering excellence and attention to detail, the G4237/8 combines innovative technologies with a sleek design to enhance the cycling experience.

One of the standout features of the Burley G4237/8 is its lightweight frame, crafted from high-grade aluminum alloy. This material not only adds durability but also ensures that the bike remains easy to handle and maneuver, making it a perfect choice for various terrains. The frame geometry is designed for comfort, providing an upright riding position that reduces strain during long rides and makes it suitable for both city commuting and off-road adventures.

The G4237/8 is equipped with advanced suspension technology, improving shock absorption and ride quality. Whether tackling rocky paths or navigating through city streets, the bike maintains stability and control, providing a smooth experience. Additionally, the suspension system is adjustable, allowing the rider to personalize the bike's response based on their preferences or riding conditions.

Another attractive feature is the bicycle's integrated braking system. The Burley G4237/8 utilizes hydraulic disc brakes, known for their reliability and consistent performance, regardless of weather conditions. This means that riders can expect precise stopping power, enhancing safety during descents or in emergency situations.

The Burley G4237/8 is also outfitted with a user-friendly gear system that simplifies shifting. The gear ratios provide a broad spectrum of options, making it easy to tackle diverse landscapes effortlessly. Riders can transition smoothly from steep inclines to flat roads without losing momentum.

In terms of aesthetics, the Burley G4237/8 does not compromise. The bike features a modern design with a selection of vivid color options, ensuring that riders not only enjoy performance but also look stylish while doing so.

Overall, the Burley G4237/8 stands out due to its combination of lightweight construction, innovative suspension, reliable braking technology, and user-friendly gear options. This bike is designed to meet the needs of a wide range of cyclists, offering the perfect blend of comfort, safety, and style, making it an outstanding choice for anyone seeking an exceptional riding experience.
Top Page Image Contents