Collecting Audit Information

This feature allows the owner to retrieve audit information stored in the tumbler by pressing a sequence of pads on the control. For an explanation of the audit options available, refer to the Audit Options List on this page.

How to Enter Audit Feature

1.Control must be in Manual Mode to start. Refer to Entering the Manual Mode.

2.Press the Up () or the Down () keypad until “” appears.

3.Press the Start ( ) keypad. “” will appear.

2.Once the desired option appears in the display,

press the Start ( ) keypad once to start the audit count.

3.Press the Start ( ) keypad again. The control will go to the next audit option in the Audit Options List.

4.To select other audit options, repeat steps 1 – 3.

How to Exit Audit Feature

Press the Back () keypad until the control returns to Idle Mode.

If the procedure did not work, the control will return to the Idle Mode.

How to Read Audit Data

1.Use the Up () or the Down () keypad to scroll through various options until the desired option is shown in the display. Refer to the Audit Options List, Table 2, for an explanation of the audit options available.

	Audit Options List

Display	Description

	Total # of Machine Cycles

	Total # of Run Hours

	Total # of Heat Hours

 	Total # of Rapid Advance Cycles

 	Total # of Aborted Cycles

	Total # of Times Anti-Wrinkle Exceeded

	Average Time from End of Cycle to Door
	Open (Last 25 Cycles)
	Average Time from End of Cycle to Run
	Mode (Last 25 Cycles)
	Table 2

70444901

70444901R3 specifications

Alliance Laundry Systems has long been recognized as a leader in providing high-quality commercial laundry equipment, and the 70444901R3 stands as a testament to their commitment to innovation and performance. This model is particularly designed for the robust needs of laundromats, coin-operated facilities, and on-premise laundries, making it a versatile asset in the laundry industry.

One of the main features of the Alliance Laundry Systems 70444901R3 is its advanced microprocessor control system, which allows for precise management of wash cycles. This technology enables operators to customize and optimize wash programs based on specific fabric types and soil levels. Such adaptability ensures that every load receives the appropriate care, extending the life of the garments and maintaining their quality over time.

Additionally, the 70444901R3 is engineered with energy efficiency in mind. Its cutting-edge design minimizes water and energy consumption, reducing operational costs while also promoting sustainability. The machine's environmentally conscious construction not only benefits the bottom line but also aligns with growing consumer demand for eco-friendly practices in laundry operations.

In terms of capacity, the 70444901R3 boasts a sizeable drum, allowing for larger loads and thereby increasing throughput. This characteristic is essential for busy facilities aiming to maximize productivity. The sturdy construction also ensures that the unit can withstand heavy use without compromising performance.

Another noteworthy feature is the unit's user-friendly interface, which simplifies operation for staff and customers alike. Clear instructions and a straightforward display reduce the learning curve, making it easier for all users to navigate the laundry process.

Moreover, the 70444901R3 integrates various safety features to protect both users and the equipment. These include door locks during operation and overload protection, which contributes to its longevity and reliability.

Overall, Alliance Laundry Systems 70444901R3 is a powerful combination of advanced technology, energy efficiency, and user-friendly functionality, making it an excellent investment for businesses in the laundry sector looking to enhance their service offerings. With its capacity for high-volume processing and commitment to quality, this model continues to set the standard for commercial laundry operations.