Installation Considerations, Tech TIP | Niles Audio SS-6 specs

S P E A K E R S E L E C T I O N S Y S T E M

Installation Considerations

SS-4/SS-6 Power Handling

The SS-4/SS-6 is designed for use with a receiver or amplifier having a maximum power output of 100 watts per channel at 8 ohms. Damage caused by the use of a higher-power receiv- er or amplifier will void the warranty. Niles speaker selectors with higher power handling capabilities are available. Consult your Niles dealer, or receiver/amplifier manufacturer, if you are uncertain about the power rating of your receiver or amplifier.

Amplifier Impedance Load

As more pairs of speakers are parallel connected to a receiver or amplifier, the overall system impedance becomes lower. For example, if two pairs of 8-ohm speakers are connected in par- allel, the impedance will be 4 ohms; two pairs of

Playing Two or More Speaker Pairs Simultaneously

1.Make sure the amplifier or receiver power is OFF and set the volume to minimum.

2.On the right side of the SS-4/SS-6’s front panel is a button labeled PROTECTION. This button activates the SS-4/SS-6’s impedance correction circuitry. The circuitry assures that your receiver or amplifier will see a safe operating load when play- ing multiple speaker pairs simultaneously. Since most receivers and amplifiers are not rated for use below a 4 ohm load, you will need to activate the Protection button whenever the over- all system impedance might fall below 4 ohms. Use the follow- ing chart as a guide for setting the Protection button.

“TECH TIP”

You will need to acti- vate the SS-4/SS-6’s PROTECTION button whenever the overall system impedance might fall below

4 ohms.

4-ohm speakers in parallel become 2 ohms, and so on.

Most receivers or amplifiers are not rated for use below a 4 ohm load. Most manufacturers do not recommend connect- ing more than two pairs of speakers without using some form of impedance correction.

The SS-4/SS-6 includes impedance correction circuitry which protects your receiver or amplifier from low impedance loads. The circuitry assures that your receiver or amplifier will see a safe operating load, even when all speaker pairs are playing at the same time.

	When playing the following speakers:	The Protection button should be:
	When playing the following speakers:	The Protection button should be:
	1 or 2 pair of 8-ohm speakers	OFF

	3 or more pairs of 8-ohm speakers	ON
	1 pair of 4-ohm speakers	OFF
	2 or more pairs of 4-ohm speakers	ON

	Any combination of 4 and 8 ohm speakers	ON

Set the Protection button to the correct position using the chart shown above.

SS-6 specifications

Niles Audio SS-6 is a sophisticated speaker selector designed to help users seamlessly manage multiple audio zones in one easy-to-use unit. With a sleek and unobtrusive aesthetic, the SS-6 blends perfectly into home environments while providing powerful audio control capabilities tailored to the needs of modern multi-room audio systems.

One of the standout features of the Niles SS-6 is its ability to connect up to six pairs of speakers to a single amplifier, allowing users to enjoy audio in various rooms or outdoor areas without sacrificing sound quality. This versatility makes it an ideal choice for homeowners who wish to distribute sound throughout their property without the need for complex wiring or multiple amplifiers.

The SS-6 utilizes advanced technologies that ensure optimal performance and reliability. A key characteristic of the unit is its impedance-matching capabilities, which protect the amplifier from damage by maintaining a safe operating load. This feature is crucial when multiple speakers are running simultaneously, as it ensures consistent audio quality across all zones.

In addition to its protective features, the SS-6 offers independent volume control for every connected speaker pair. This allows users to fine-tune the audio experience in each room, ensuring that the sound level is just right for every environment. This customizable approach to audio management enhances user experience, making it simple to adjust sound based on personal preferences or specific activities.

Ease of use is another hallmark of the Niles SS-6. The front panel is equipped with simple push-button controls that facilitate quick adjustments without needing complicated remotes or apps. Furthermore, the inclusion of LED indicators simplifies monitoring the status of each speaker zone, providing visual feedback at a glance.

The build quality of the SS-6 is robust, featuring durable components designed to withstand the rigors of everyday use while delivering consistent audio performance. Its compact design allows for neat installation within in-wall enclosures or surface-mounted applications, making it a flexible solution for various usage scenarios.

In summary, the Niles Audio SS-6 combines functionality, convenience, and quality, making it an essential component for any home audio enthusiast looking to enhance their listening experience throughout their living spaces. With its impressive features and user-friendly design, the SS-6 stands out as a reliable choice for managing audio in diverse environments.