BRK electronic M06-2016-007, 4120B user manual To Lock The Battery Compartment

Page 10

To Lock The Battery Compartment

IMPORTANT!

Do not lock the battery compartment until you have activated the battery and tested the battery back-up.

1. Activate the battery back-up by removing the “Pull to Activate Battery Back-Up” tab.

2. Push and hold test button until the alarm sounds: 3 beeps, pause, 3 beeps, pause.

If the unit does not alarm during testing, DO NOT lock the battery compartment! Install a new battery and test again. If the smoke alarm still does not alarm, replace it immediately.

3. Using needle-nose pliers or a utility knife, detach one locking pin from the mounting bracket.

4.Push the locking pin

through the black dot on the label on the back of the smoke alarm.

8

To Un-Lock The Battery Compartment

IMPORTANT!

Once the smoke alarm is installed, you must disconnect it from the AC power before unlocking the battery compartment.

DANGER!

ELECTRICAL SHOCK HAZARD. Turn off the power to the area where the smoke alarm is installed before removing it from the mounting bracket. Failure to turn off the power first may result in serious electrical shock, injury or death.

WARNING!

Always discharge the branch circuit before servicing an AC or AC/DC smoke alarm. First, turn off the AC power at the circuit breaker or fuse box. Next, remove the battery from smoke alarms with battery back-up. Finally, press and hold the test button for 5-10 seconds to discharge the branch circuit.

1.Remove the smoke alarm from the mounting bracket. If the unit is locked to the bracket, see the section “To deactivate the locking feature.”

2.Disconnect the power connector by gently prying it away from the back of the smoke alarm.

3.Insert a flathead screwdriver under

the head of the locking pin, and gently pry it out of the battery compartment lock. (If you plan to relock the battery compartment, save the locking pin.)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User’s Manual Other Features of Smoke Alarms Inside this ManualWhere To Install Smoke Alarms NEW ConstructionMore specifically, install smoke alarms Agency Placement RecommendationsNfpa Standard 72 Section For best performance, do not install the unit Where Not To Install Smoke AlarmsCalifornia State Fire Marshall Avoiding Dead Air Spaces Important! Read Before You Install This Smoke Alarm Understanding The Indicator Lights and Alarm Horn Patterns Important Installation Parts Optional Locking FeaturesTo Lock The Battery Compartment To Lock The Mounting Bracket How To Install This Smoke Alarm Parts Of This UnitInstalling a Single Stand-Alone Smoke Alarm Tools you will need Standard/Flathead screwdriverInterconnecting Multiple Smoke Alarms Interconnecting Multiple Smoke Alarms To install and interconnect multiple alarmsRegular Maintenance Testing and MaintenanceWeekly Testing Choosing a replacement batteryIf This Smoke Alarm Sounds Responding To An AlarmCat SB Only Using The Silence Feature To silence smoke alarms An interconnected seriesProtecting Your Family From Fire If Your Smoke Alarm Needs Service What To Do Case Of FireTroubleshooting Single-Family Residence Special Compliance ConsiderationsHotels/Motels Limitations Of Smoke Alarms Year Limited Warranty

4120B, M06-2016-007 specifications

The BRK electronic M06-2016-007,4120B is a cutting-edge detection device designed for modern safety needs. This model exemplifies BRK's commitment to innovation, reliability, and user-friendly functionality. The M06-2016-007,4120B is primarily a smoke and carbon monoxide detector, ensuring comprehensive protection against two of the most prevalent household hazards.

One of the standout features of this model is its advanced photoelectric sensing technology. Unlike traditional ionization smoke detectors that rely on radioactive materials, the photoelectric sensor uses light beams to detect smoke particles effectively. This technology is particularly adept at identifying smoldering fires, which can produce higher amounts of smoke before bursting into flames, ultimately leading to quicker alerts for homeowners.

In addition to its smoke detection capabilities, the M06-2016-007,4120B efficiently monitors carbon monoxide levels. Carbon monoxide is a colorless, odorless gas that can be deadly in high concentrations. The detector continuously samples the air and provides real-time readings to alert occupants when levels become dangerous. This dual functionality makes the M06-2016-007,4120B a two-in-one safety device, underscoring its versatility.

The alarm system of the M06-2016-007,4120B is robust and designed for maximum audibility, ensuring that even in the sleep state, alerts can be heard. It features a loud siren that meets industry standards, providing reassurance that occupants will be warned in the event of an emergency.

Powering the device is a reliable battery backup that ensures continued operation even in power outages, making it a dependable choice for safety-conscious consumers. Furthermore, the device incorporates a low-battery alert feature to remind users when it's time to replace the batteries, enhancing ongoing reliability.

Moreover, the M06-2016-007,4120B boasts an easy installation process, allowing homeowners to set it up without the need for professional assistance. The compact design ensures it can fit seamlessly into various home environments without being intrusive.

In conclusion, the BRK electronic M06-2016-007,4120B is a highly effective smoke and carbon monoxide detector that combines advanced technology with practical safety features. Its photoelectric sensing, dual detection capabilities, and reliable power backup position it as a must-have for any household looking to enhance its safety measures.
Top Page Image Contents