BRK electronic 4120B, M06-2016-007 user manual Installing a Single Stand-Alone Smoke Alarm

Page 13

Installing a Single (Stand-Alone) Smoke Alarm

Tools you will need: Standard/Flathead screwdriver

DANGER!

ELECTRICAL SHOCK HAZARD. Turn off power to the area where you will install this unit at the circuit breaker or fuse box before beginning installation. Failure to turn off the power before installation may result in serious electrical shock, injury or death.

To install this unit, follow these steps:

1.Remove the mounting bracket from the base, and attach it to the junction box.

2.Using wire nuts, connect the power connector to the household wiring.

•Connect the white wire on the power connector to the neutral wire in the junction box.

•Connect the black wire on the power connector to the hot wire in the junction box.

•Tuck the orange wire inside the junction box. It is used for interconnect only.

3.Plug the power connector

into the back of the smoke alarm.

4.Position the base of the alarm over the mounting bracket and turn. The alarm can be positioned over the bracket every 60°. Turn the smoke alarm clockwise (right) until the unit is in place.

5.If you are only installing one unit, restore power to the junction box.

DANGER!

ELECTRICAL SHOCK HAZARD. Do not restore power until all smoke alarms are completely installed. Restoring power before installation is complete may result in serious electrical shock, injury or death.

6.Make sure the unit is receiving AC power. Under normal operation, the Green power indicator light will shine continuously.

7.If the Green power indicator light does not light,

TURN OFF POWER TO THE JUNCTION BOX and recheck all connections. If all connections are correct and the Green power indicator still does not light when you restore the power, the unit should be replaced immediately.

IMPORTANT!

Cat. 4120SB Only: During installation, if you accidentally press the Silence button, the alarm will “chirp” once a minute for up to 15 minutes and the Test feature will be temporarily disabled. This is normal. The “chirping” will stop once the alarm returns to normal operation.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Manual Inside this Manual Other Features of Smoke AlarmsNEW Construction Where To Install Smoke AlarmsMore specifically, install smoke alarms Agency Placement RecommendationsNfpa Standard 72 Section For best performance, do not install the unit Where Not To Install Smoke AlarmsCalifornia State Fire Marshall Avoiding Dead Air Spaces Important! Read Before You Install This Smoke Alarm Understanding The Indicator Lights and Alarm Horn Patterns Optional Locking Features Important Installation PartsTo Lock The Battery Compartment To Lock The Mounting Bracket Parts Of This Unit How To Install This Smoke AlarmTools you will need Standard/Flathead screwdriver Installing a Single Stand-Alone Smoke AlarmInterconnecting Multiple Smoke Alarms To install and interconnect multiple alarms Interconnecting Multiple Smoke AlarmsWeekly Testing Testing and MaintenanceRegular Maintenance Choosing a replacement batteryResponding To An Alarm If This Smoke Alarm SoundsTo silence smoke alarms An interconnected series Cat SB Only Using The Silence FeatureProtecting Your Family From Fire What To Do Case Of Fire If Your Smoke Alarm Needs ServiceTroubleshooting Single-Family Residence Special Compliance ConsiderationsHotels/Motels Limitations Of Smoke Alarms Year Limited Warranty

4120B, M06-2016-007 specifications

The BRK electronic M06-2016-007,4120B is a cutting-edge detection device designed for modern safety needs. This model exemplifies BRK's commitment to innovation, reliability, and user-friendly functionality. The M06-2016-007,4120B is primarily a smoke and carbon monoxide detector, ensuring comprehensive protection against two of the most prevalent household hazards.

One of the standout features of this model is its advanced photoelectric sensing technology. Unlike traditional ionization smoke detectors that rely on radioactive materials, the photoelectric sensor uses light beams to detect smoke particles effectively. This technology is particularly adept at identifying smoldering fires, which can produce higher amounts of smoke before bursting into flames, ultimately leading to quicker alerts for homeowners.

In addition to its smoke detection capabilities, the M06-2016-007,4120B efficiently monitors carbon monoxide levels. Carbon monoxide is a colorless, odorless gas that can be deadly in high concentrations. The detector continuously samples the air and provides real-time readings to alert occupants when levels become dangerous. This dual functionality makes the M06-2016-007,4120B a two-in-one safety device, underscoring its versatility.

The alarm system of the M06-2016-007,4120B is robust and designed for maximum audibility, ensuring that even in the sleep state, alerts can be heard. It features a loud siren that meets industry standards, providing reassurance that occupants will be warned in the event of an emergency.

Powering the device is a reliable battery backup that ensures continued operation even in power outages, making it a dependable choice for safety-conscious consumers. Furthermore, the device incorporates a low-battery alert feature to remind users when it's time to replace the batteries, enhancing ongoing reliability.

Moreover, the M06-2016-007,4120B boasts an easy installation process, allowing homeowners to set it up without the need for professional assistance. The compact design ensures it can fit seamlessly into various home environments without being intrusive.

In conclusion, the BRK electronic M06-2016-007,4120B is a highly effective smoke and carbon monoxide detector that combines advanced technology with practical safety features. Its photoelectric sensing, dual detection capabilities, and reliable power backup position it as a must-have for any household looking to enhance its safety measures.
Top Page Image Contents