Niles Audio Subwoofer Manual for SW6.5 and SW8

CONNECTION AND CONTROLS (CONTINUED...)

CONTROLS (CONTINUED...)

Frequency (7)

Adjust this control to match the characteristics of the main speakers. For applications where full-range signals are sent to the subwoofer, the 100 Hz Normal setting will usually produce the best results. If the main speakers are compact, their more limited lower frequency range may necessitate a higher subwoofer frequency setting. For systems with large, full range main speakers that can reproduce deep bass, lowering the frequency setting may be desirable. If the audio source (A/V surround pre-amp, processor or receiver) is equipped with a bass management/bass re-direction function that includes low pass filtering for the Sub output (which is almost always the case), set the Frequency control on the Niles Subwoofer to Bypass to prevent cascaded low pass filtering.

Phase (8)

Depending on the subwooofer’s physical placement and the acoustical characteristics of the main speakers, achieving optimal blend may necessitate phase adjustment. Upon initial installation and setup, set the control to the 0° (in-phase) position, and listen to a variety of program material, including music selections as well as movie soundtracks. Experiment by adjusting the Phase control in small increments until the best combination of low bass sound quality and matching (blending) with the main speakers is achieved.

Level (9)

Initially set the control to the lowest position, and while listening to music and film content, slowly adjust the control upward until an even bass response is achieved. Many A/V receivers and surround processors include a built-in noise generator for channel level balancing, and by using a sound pressure level meter, it’s possible to quickly find the optimum subwoofer level setting. When using an SPL meter to match subwoofer output level with the main speakers, it’s important to make measurements at the principal listening position. The 0dB setting (mid-point) is often the best setting, and further subwoofer channel level fine-tuning adjustments can be made via the A/V surround processor or receiver’s channel level adjustment control.

1-800-BUY-HIFI – www.nilesaudio.com		7

9901212-P07-SW6.5_SW8-MANUAL.indd 7	9/26/11 6:55 PM

SW8, SW6.5 specifications

Niles Audio has long been recognized as a trusted name in the home audio industry, providing high-quality solutions for audiophiles and casual listeners alike. Among its impressive lineup, the Niles SW6.5 and SW8 speakers stand out for their exceptional performance and advanced technologies, making them ideal for enhancing the listening experience in various environments.

The Niles SW6.5 is a compact in-wall subwoofer designed to deliver powerful bass without taking up valuable floor space. Its innovative design features a 6.5-inch polypropylene cone driver, which ensures accurate sound reproduction and rich low-frequency performance. The SW6.5 is engineered for easy installation, allowing homeowners to seamlessly integrate it into their existing audio systems.

In contrast, the Niles SW8 boasts an 8-inch driver, providing even deeper bass response. The SW8 is perfect for larger rooms or for users who demand a more impactful audio experience. Its robust construction ensures durability, while the stylish front grille enhances the aesthetic appeal, blending effortlessly with any décor.

Both models are equipped with advanced technologies that maximize audio performance. They feature a built-in high-pass filter, which eliminates frequencies that the main speakers cannot reproduce, allowing the subwoofers to focus on delivering tight, controlled bass. Additionally, their enclosure design minimizes distortion and maximizes efficiency, ensuring that the sound remains clean and powerful even at higher volumes.

The Niles SW6.5 and SW8 are versatile and can be used in various applications. From home theater systems to multi-room audio setups, these subwoofers can enhance any sound environment. They are compatible with a range of amplifiers and processors, making them adaptable for different configurations and user preferences.

Furthermore, both models prioritize ease of use and installation. The included mounting brackets and templates simplify the process, making it easy for even novice users to set them up. The front-facing controls allow for straightforward adjustments and fine-tuning of the audio output.

In summary, Niles Audio's SW6.5 and SW8 subwoofers offer exceptional performance, innovative technologies, and user-friendly features, making them an excellent addition to any audio system. Whether you're seeking to enhance your home theater experience or simply enjoy music with richer bass, these subwoofers provide the quality and versatility that Niles Audio is known for.