Fire Alarm Systems SM 120 RW Single Action Call Points
SM 120 RW Single Action Call Points
▶ Alarm triggering by breaking of the glass pane ▶ Protection against injury with
▶ Indicator LED for triggered alarm or for inspection evaluation
Single Action Call Points SM 120 RW are used to manually trigger alarm in conventional technology. The design enables deployment in the European area (not Germany!).
System Overview
1
AB
Pos. Description
1Detectors for indoor areas (IP 54)
AFor installation on a
B
The microswitch (2) can be reset by inserting a new glass pane (1). The indicator LED (3) goes out.
This does not reset the alarm on the fire panel.
Detector test (test alarm)
During the detector test, the detector key is shoved from below into the notch (4). Thus the holding pin (5) of the pane is unlocked, the pane slides downwards and the microswitch (2) triggers.
Variants
Two installation variants are available:
•SM 120 RW, for surface mounting in indoor areas,
•SM 120 RW, for flush mounting in indoor areas,
The detectors are available in the colors red and blue.
Certifications and Approvals
Region | Certification |
|
Russia | GOST | POCC DE.C313.B06297 |
Functions
After the glass pane (1) is broken, the alarm is triggered by the button of the microswitch (2) jumping forward and the indicator LED (3) blinks.
Installation/Configuration Notes
•Manual call points have to be mounted so that they are easily visible along escape and rescue routes (e. g. exits, passageways, stairwells) and easily accessible.
www.boschsecurity.com