Niles Audio HT-MSU manual Ht-Msu, Specifications

SPECIFICATIONS

HT-MSU

Power Requirements: 12VDC 1.25A Regulated In-line Power Supply (Included)

Unit Dimensions: 10.52” x 5.85” x 1.01” (26.72 cm x 14.86 cm x 2.57 cm)

Wiring Requirements: RG59 CL Antenna Cable (included), CAT-5 cable, 3 conductor 22-gauge cable, and 2 conductor 22-gauge cable

Trigger Output Voltage: Three assignable outputs at 12VDC 150mA

Contact Closures: Three assignable Normally Open/Normally Closed contact closures rated to handle 12v @ 5 amps each

IR Ports: 8 Routed IR Flasher Ports and 1 Routable Global IR Output Port

RS232 Ports: 8 Routed RS232 Output Ports

IR & RS232 Code Memory: 4000 commands depending on brand type and model of source

Sequence capability: 450 thirty-two step sequences

Sequence Delays: .1 to 20.0 seconds per step

Component Synchs: 8 Power Status Synch ports rated to sense 12V 150mA input signals or video voltage

IR Bandwidth: Compatible with virtually all brands of remotes using carrier frequencies between 26 and 105kHz

RF Section: 2.4-gigahertz frequency ZigBee® wireless mesh technology

Signal Range: 75 to 100 feet open air (22.86 to 30.48 meters)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 21