Bosch Appliances D7024 manual Panel Programming, Setup Keypad, Local, Remote

D7024

Panel Programming

These menu items are only allowed at the local keypad.

The following window will appear:

OPTION BUS (M/M)

1- UPDATE BUS

2- SETUP KEYPDS

Press [1] to program system to update bus. After you have programmed Update Bus, the following window will appear:

UPDATE COMPLETE

TOT BUS DEVS: X

Then the previous window will appear.

7.3.3.2 Setup Keypad

Shortcut: 0-PROG,3-PROG SYSTEM, 4-OPTION BUS

This feature tells the system how many keypads should be supervised. It automatically performs an update bus operation as it completes.

OPTION BUS

1- UPDATE BUS

2- SETUP KEYPDS

Press [2] to set up keypads. The following window will appear:

#OF KEYPADS (__) (0-4): ____

Enter the desired value and press [#]. The current setting is displayed in parentheses on the first line. After you set up the keypads, the update bus operation proceeds (see above), then the previous window will display.

7.3.4PIN REQUIRED

7.3.4.1 Local

Shortcut: 0-PROG,3-PROG SYSTEM, 5-PIN REQUIRED?

A PIN can be required before operations can be performed using the local, built-in keypad.

The following window will appear:

PIN REQUIRED?

1- LOCAL

2- REMOTE

Press [1] to require a PIN at the local keypad. The following window will appear:

LOCAL KEYPD PIN?

____:YES(1)NO(2)

Press the number key that corresponds to your selection. The current setting is displayed in front of the colon on the second line. After making your selection, the previous window will display.

7.3.4.2 Remote

Shortcut: 0-PROG,3-PROG SYSTEM, 5-PIN REQUIRED?

The following window will appear:

PIN REQUIRED?

	1-	LOCAL
	2-	REMOTE
			D7024 Operation and Installation Guide
© 2005 Bosch Security Systems			Page 51	41740F