Bosch Appliances D7024 manual Dialing Type, Phone Contro Pulse only TONE/PULSE Tone only

D7024

Panel Programming

7.6.2.2 Dialing Type

Shortcut: 0-PROG,6-PROG ACC’NTS, 2-PHONE CONTROL

This feature determines what format the panel will use for dialing on each phone line. The tone/pulse setting will first try tone dialing, and if that fails, will switch to pulse dialing.

Choose Line 1 or Line 2. The display will scroll through the Phone Control options. Press [2] for DIALING TYPE. The following window will display:

PHONE CONTRO (__)

1- PULSE ONLY

2- TONE/PULSE

3- TONE ONLY

Press the number key that corresponds to your selection. The previous window will be displayed.

7.6.3Report Steering

Shortcut: 0-PROG,6-PROG ACC’NTS, 3-RPT STEERING

Different classes of reports can be directed to different phone numbers. Non-supervisory alarms include fire alarms, waterflow alarms and monitor alarms. Supervisory alarms come from points configured as a supervisory type. Non- supervisory restorals include fire, waterflow and monitor restorals. Supervisory restorals come only from points configured as a supervisory type. Trouble reports include all point and system troubles and restorals. Tests include auto tests, manual tests and off-normal at test reports. The panel allows the special reports “silence”, “reset” and “drill” to be individually directed.

If any reports are steered to Phone Number 2 (including the default, “phone 2 backup”), a phone number and account number must be programmed for Phone Number 2. The panel will indicate a “comm fault” if it sends a report (using phone number 1 parameters) which references unprogrammed Phone Number 2 parameters.

The display will scroll through the following items:

REPORT STEERING

1- NONSUP ALRM

2- SUPVSRY ALRM

3- NONSUP RSTR

4- SUPVSRY RSTR

5- TROUBLE

6- TESTS

7- SILENCE

8- RESET

9- FIRE DRILLS

Press the number key that corresponds to your selection. The following window will display (with varying headings, depending on your choice. In this example, non-supervisory alarm is selected):

NONSUP ALRM (___)

1- PHONE 1 ONLY

2- PHONE 2 ONLY

3- PHON 1 AND 2

4- PHN 2 BACKUP

5- NO REPORT

•PHONE 1 ONLY: Report sent to Phone #1 only.

•PHONE 2 ONLY: Report sent to Phone #2 only.

•PHONE 1 AND 2: Report sent to Phone Numbers 1 and 2.

•PHONE 2 BACKUP: Report sent to Phone #1, then to Phone #2 if #1 fails.

•NO REPORT: No report sent.

Press the number key that corresponds with your selection. The previous window will be displayed.

	D7024 Operation and Installation Guide
© 2005 Bosch Security Systems	Page 65	41740F