Hearth and Home Technologies Complete Guide to GFK4B Fan Kit Installation

Page 1

TM

Installation Instructions

Models:

GFK4B¨

Fan Kit

If you need clarification of any of the instructions contained here contact your dealer or the Technical Services Department at 1-800-927-6841.

The GFK4B Fan Kit has been designed to circulate room air through the appliance to enhance heat output. The fan kit oper- ates on 120VAC, 60 Hz power. This is available through a receptacle in the factory installed junction box. The junction box is located in the controls compartment of the appliance.

A control module is provided with the fan kit which automatically turns the fan on and off at preset times and is equipped with a variable speed control to provide a quiet forced air flow at the desired speeds.

Check Contents of Shipping Carton

Compare contents of carton in Table 1 with the actual parts received. If any parts are missing or damaged, contact your dealer before starting installation. Do not install a damaged fan kit.

Installation Precautions

The GFK4B Fan Kit is tested and safe when installed in accordance with this installation manual. It is your responsibility to read all instructions before starting installation and to follow these instructions carefully during installation to assure maxi- mum benefit from, and safe operation of, the fan.

WARNING

Shock Risk

Explosion Risk

Do NOT wire 110-120 VAC to gas control valve.

Do NOT wire 110120 VAC to wall switch

Incorrect wiring will damage millivolt values.

Incorrect wiring will override IPI safety lockout and may cause explosion.

Note: This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA 70-latest edition or the Canadian Electric Code CSA C22.1.

CAUTION

Sharp Edges

Wear protective gloves and safety glasses during installation.

Note: An arrow (¨) found in the text signifies change in content.

WARNING

Shock Risk

Fire Risk

Use ONLY optional accessories approved for this appliance.

Using non-listed accessories voids warranty.

Using non-listed accessories may result in a safety hazard.

Only Hearth & Home Technologies approved accessories may be used safely.

Description

Qty.

Fan

 

1

Screws

 

6

Foam Tape

 

2

 

 

Control Module

1

Electrical Cord

1

 

 

Magnetic Tape

2

Fan Bracket

 

1

 

 

Jumper Wire (blue)

1

Table 1

Contents of Carton

Note: You may not need all parts included with this kit.

Hearth & Home Technologies • GFK4B Fan Kit • 4016-095 Rev H • 11/08

1

Image 1
Contents Installation Precautions Check Contents of Shipping CartonInstall the Fan Bracket & Shield Install the Air DeflectorInstall the Control Module Install the FanWiring the Fan Control Module SIT Valve Recommended Fan Control Set-up Procedure