Devices | Carbon Monoxide |
(CO) Alarms |
ANCILLARY PRODUCTS
MCP401RC Manual Call Point
●Supplied complete with surface mount box
●Testing key supplied
●Supplied with
●LPC approved, conforms to BS EN
●Can be used with 140, 150, 160RC Models
SAB300 Remote Strobe Xenon Beacon
●Mains powered
●For internal or external use
●Flash energy of 3 watts and flash frequency of .9Hz
●Clear or red lens options
●For operation via an Ei158R or Ei128R relay
SABV4 High Intensity Strobe Xenon Beacon
●Mains powered
●Ideal for use where standard strobes may not be sufficiently visible
●5 joule high intensity flash
●Low current consumption
●Red or opal lens option
●For operation via an Ei158R or Ei128R relay
YO3 Remote Sounder
●Mains powered
●Use in areas where a warning is required - but a detector isn't
●For internal or external use
●Switchable sound outputs from
●For operation via an Ei158R or Ei128R relay
MDH230 Magnetic Door Holder
●Mains powered
●Will automatically release a fire door in the event of a fire
●Test/Override button feature
●Low current consumption
●For operation via an Ei158R or Ei128R relay
Ei167 Remote Sounder
●Interconnects with all mains operated smoke and heat alarms
●Ideal for use where an alarm but no detection is required
●AC mains indicator light
Further details of all the products featured on these pages are available from our Customer Service Helpline on 0870 758 4000 or visit our website www.aico.co.uk and download our product information
NO ALARM - NO CHANCE!
Carbon Monoxide or (CO), is a particularly insidious gas. It is a killer. The naked eye can't see it, it does not smell, it has no taste. The need for a reliable mains powered alarm that will operate even in the event of a mains failure is obvious.
The Ei professional range includes fully featured product usually specified by Local Authorities & Landlords and less sophisticated product where duty of care is not so much of an issue and where the mains supply is more likely to be continuous and /or regular battery maintenance is known to be reliably carried out.
The Ei261EN is the top of the range product. Current sensor technology used by all manufacturers of CO alarms has a limited life cycle; the sensors cannot be relied upon after a period of 5/6 years. The Ei261EN offers a replacement sensor feature, thereby increasing the life cycle of the product to ten years.
Ei261EN Mains Powered CO Alarm with Rechargeable Lithium Cells and Replaceable CO Sensor
●10 year+ rechargeable lithium cell
●Replacement sensor module, minimum five year life
●Easy to use test/hush button
●Automatic self diagnostics
●Distinctive alarm sound, easily distinguishable from a smoke alarm
●Wall or ceiling mounting
●Pre alarm warning
●Interconnect feature - Can be interconnected with Ei smoke and heat alarms. Contact us for details
●Comprehensive Indicator lights: Mains on / Fault / Alarm on
●Optional digital display - Ei261DEN
●Quick CO gas test feature
NOW WITH RC TECHNOLOGY OPTION
BS EN 50291: 2001
INTERCONNECT
FEATURE
RECHARGEABLE
LITHIUMI I CELLS
EASY TO
REPLACE
SENSOR MODULE
15