Innovative Design & Quality Features

Ei's unique large volume optical smoke chamber & sophisticated electronics

have a proven track record of reliability and high efficiency detection. Longevity and resistance to false alarms as well as reliable

protection from electromagnetic interference has also been proven over the last 15 years.

At 85dB(A) at 3 metres our alarms are loud. Unique encased horn assembly has the piezo disc securely held with silicone mastic to prevent creepage and premature horn failure. Additionally soldered contacts prevent failures due to corrosion and arcing associated with more commonly used pressure contacts.

Self monitoring and indicating LEDs & audible warning signals. Each alarm self tests every 40 seconds. Two separate LED indicators are used to indicate healthy mains supply, fault, battery fault, alarm status and low cell/battery warning.

Ultra high performance vanadium pentoxide lithium rechargeable cells are used on the 160RC Series, 150 Series and RadioLINK bases. These cells offer the best back-up possible and are designed to outlast the alarms.

●A precision charging circuit ensures peak cell efficiency at all times

●Cells provide up to six months back-up even without mains power

●Alkaline battery in the 140 Series designed to last up to 4 years in standby

Smoke Alarms are sophisticated electronic devices. Protection from external contamination is vital to maintain the fire detecting sensitivity of the product and to minimise

false alarms. A fine mesh insect screen reduces false alarms caused by insect contamination and fibres, whilst allowing free access of smoke to the sensor chamber. A dust cover is also provided for protection on site and prior to occupancy.

The hush button provides for false alarm control on all Easi-fit models. Also provides manual test function.

THE FASTEST SIMPLEST INSTALLATION POSSIBLE…

Fitting an Easi-fit mains powered alarm really is this simple:

REMOVAL

Screw the mounting plate supplied with the alarm to the ceiling during first fix.

No separate enclosure is required.

Wire up terminals	Slide the alarm into	The alarm is removed by
on the mounting	place. There's no	releasing the tamper-resistant
plate and clip on	need to wire up a	clip with a screwdriver and
the protective	separate lead and	sliding it off. The protective cover
cover.	connector.	ensures that the mains cables
		are never exposed.