Attaching the unit to a wall (Optional) (continued)
Wall mount instructions (continued)
4. Hang the unit on the wall. | Wall |
|
Hook the unit securely onto the mounting
screws C .
• Connect the FM/AM antenna before hanging the
main unit on the wall (➡ page 4).
• After hanging the unit, release your hand carefully to confirm the unit sits securely on the wall.
Wall bracket
Slot both screws into this position firmly.
ENGLISH
5. Install the safety holder.
Fix the safety holder onto the wall bracket.
Drive safety holder screw C to secure the safety holder onto the wall.
g Fall-preventive measure (Optional)
Thread a wire (commercially available) through the slot on the
wall bracket before step 4 (➡ above).
Fix the wire to the wall with a screw (commercially available) after step 5 (➡ left).
Safety holder screw C | Safety holder |
|
Fixed to the wall
Removing the unit from the wall
•Fix the screw to the wire so that a slack of no more than
5 cm (1 31/32") is kept in the upper center part of the main unit.
| Metal fitting |
| Screw |
| Wire |
Wire | Slot for |
| wire |
Remove safety holder screw C and the safety holder.
Unmount the unit from the wall. | Pen or a blunt object |
Unscrew fixing screw B (2 pieces).
Hold down both the catches and then slide the wall bracket off the unit (➡ right).
Reattach the stand to the bottom of the unit and secure it with fixing screw A (2 pieces).
Remove the mounting screw C (2 pieces) from the wall.
• Remove the
Catches
RQTX1146
7
7