Interconnection
ies Smoke & Heat Alarms
RadioLINK
SYSTEM CONTROL DEVICES
Ei411H Wireless
Remote Control
Switch
● When used in conjunction with RC alarms, with the Ei168RC RadioLINK base, the switch offers three vital remote control functions.
● TEST - Provides a full system test equivalent to pressing the Test button on all units simultaneously
● HUSH - Allows the silencing of any possible nuisance alarms ● LOCATE - Allows the source of
the alarms to be identified. This information is also held in the product memory
The Ei168RC RadioLINK Base Unit
At the heart of the RadioLINK system are the Ei168RC base units, which are fully compatible with any Ei160RC Series alarm.
It is from these that radio signals are transmitted and received.
An Ei168RC base is required for each of the alarms in the system.
●Mains powered with rechargeable 10 year+ lithium cell
●Radio transceiver 868.499 MHz
●Unique
●Simple and secure house coding system
●Interference free
Ei428 Remote Relay Module
●Mains powered with rechargeable 10 year+ lithium cell
●Interfaces with other systems, e.g. warden call and other signal devices
Ei407 Wireless Manual Call Point
●Allows manual testing of the system
●Allows manual alarm to warn other residents
Easy to fit
Wire in each Ei168RC RadioLINK base to the mains electricity supply.
Ei410 Wireless Remote
Control - Hand Held
●All the same features and functions as the Ei411H (above) - but built into a small key fob for personal use
●Fitted with lithium button cell
Slide a 160RC Series alarm on to the Ei168RC base which will automatically activate the rechargeable
House code each alarm in the system.
11