Programmable Weather Alarms
Each Selectable Weather Category features an alarm option. When an alarm sounds, the display unit emits audible beeping and flashes the affected category, its alarm settings, and any other relevant data.
Some alarms can be customized to alert you when your programmed value is reached. Alarms include:
OUTDOOR HUMIDITY | LOW | HIGH |
|
|
|
OUTDOOR TEMP | LOW | HIGH |
|
|
|
STORM ALARM | HIGH |
|
|
|
|
INDOOR HUMIDITY | LOW | HIGH |
|
|
|
INDOOR TEMP | LOW | HIGH |
|
|
|
WIND CHILL | LOW |
|
|
|
|
DEW POINT | LOW | HIGH |
|
| |
HEAT INDEX | HIGH | |
|
| |
RAIN | HIGH | |
|
| |
WIND SPEED | HIGH | |
|
|
|
The rain alarm does not require a preset numerical value, but instead sounds as soon as rain is recorded. Similarly, the storm alarm sounds when a large atmospheric pressure drop occurs, which usually indicates an oncoming storm. Note: The storm alarm is NOT intended to be a safety device or warning system.
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by pressing the “▲” or “▼” buttons until the category is displayed on the 
Selectable Category part of the display unit.
2. To program a value (only applies to alarms that require a |
| ||
| |||
value), press AND HOLD the “ | ” button |
|
|
underneath the alarm you wish to set until the “
” indicator appears and the alarm setting flashes. 
3. Adjust the alarm value by pressing the “▲” or “▼” buttons.
4. Press the “
”
button to confirm value.
5.Next, press the “
” button to activate the alarm (the X indicator disappears when alarm is activated).
Alarm is now programmed and turned on.
Silence a Sounding Alarm
The alarm sounds initially for a few minutes, then silences itself. The alarm then sounds every few minutes afterwards until one of the following happens:
1.“SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm condition reoccurs.
2.Turn alarm “OFF” - Deactivates alarm.
9
