Adjust the Weather Ticker Speed, Remove

Additional Messages Include:

NEW HIGH TEMPERATURE RECORD NEW LOW TEMPERATURE RECORD NEW WIND SPEED RECORD TODAY CURRENT RAINFALL RATE CURRENT RAIN EVENT STARTED

NO RAIN RECORDED SINCE ____

WEATHER ALARM MESSAGES SENSOR BATTERIES LOW SENSOR SIGNAL LOST

Adjust the Weather Ticker Speed

1.Press the “▲” or “▼” buttons until “TICKER SPEED” is displayed on the Selectable Category part of the display unit.

2.Press the “SET” button to set the speed preference.

3.Press the “▲” or “▼” buttons to select a speed: SLOW, NORMAL, or FAST.

4.Press the “SET” button to confirm your selection.

Weather Ticker speed is now set.

Customize Weather Ticker Messages

Customize which messages you want to scroll across the WEATHER TICKER:

1.Press the “ ” button to manually cycle through each message available.

2.During the MANUAL REVIEW: PRESS the “add ” button to activate the current scrolling message. The corresponding “add ” appears on screen to the left of the message to indicate the message is now active in the ticker cycle. PRESS the “ remove” button to deactivate the current scrolling message. The corresponding “ remove” appears on screen to the left of the message to indicate the message is now deactivated from the ticker cycle.

Please note: Messages can only be added and removed to the ticker cycle during manual review. The “add ” and “ remove” buttons do not add or remove messages during the automatic cycle.