Acu-Rite 06007RM/1015RX instruction manual Set the Time & Date, Set the Date

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Set the Time & Date

The clock and calendar are utilized to timestamp history records and other data, so it is important to set the time and date soon after you power on the display unit.

Note: The “” stays in Selectable Categories, even after setup.

Set the Time

1.Press the “▲” or “▼” buttons until “SET CLOCK?” is displayed on the Selectable Category part of the display unit.

2.Press the “SET” button to set the clock.

3.Press the “▲” or “▼” buttons to adjust the hour. Note the “AM” and “PM” indicators.

4.Press the “SET” button to confirm hour selection.

5.Press the “▲” or “▼” buttons to adjust minutes.

6.Press the “SET” button to confirm minute selection.

The clock is now set.

Set the Date

1.Press the “▲” or “▼” buttons until “SET DATE?” is displayed on the Selectable

Category part of the display unit.

2.Press the “SET” button to set the date.

3.Press the “▲” or “▼” buttons to adjust the month.

4.Press the “SET” button to confirm month selection.

5.Press the “▲” or “▼” buttons to adjust the day.

6.Press the “SET” button to confirm day selection.

7.Press the “▲” or “▼” buttons to adjust the year.

8.Press the “SET” button to confirm year selection.

The date is now set.

5