Hearth and Home Technologies MBK, PMH installation instructions Table of Contents

Page 3

R

Yosemite Wood Stove

 

PRE-USE CHECK LIST

1

Place the unit in a location near the final installation

 

area and follow the procedures below:

2

Open the stove and remove all the parts and articles

 

packed inside. Inspect all the parts and cast iron

 

body for shipping damage. Contact your dealer if

 

any irregularities are noticed.

3.

All safety warnings have been read and followed.

4.

This Owner’s Manual has been read.

5. Floor protection requirements have been met.

6. Chimney connector is properly installed.

7.

The proper clearances from the stove and chimney

 

to combustible materials have been met.

8.

The masonry chimney is inspected by a profes-

 

sional and is clean, or the factory built metal chim-

 

ney is installed according to the manufacturer’s

 

instructions and clearances.

9.

The chimney meets the required minimum height.

10. All labels have been removed from the glass

doors.

11.Plated surfaces have been wiped clean.

WARNING!

DO NOT TILT THE UNIT ON THE CAST IRON LEGS. Lift the unit upright and place it into position on the floor protector.

TABLE OF CONTENTS

 

SERIAL NUMBER LABEL LOCATION

2

PRE-USE CHECKLIST

3

LISTINGS & SAFETY NOTICES

4

INSTALLATIONS MATERIAL NEEDED FOR SAFETY 4

DIMENSIONS & VENT SPECIFICATIONS

5

CLEARANCES

 

Top & rear vent installations

6

Floor protection

7-8

INSTALLATION

 

TABLE OF CONTENTS (Cont'd)

Chimney connector

11

Masonry chimney

12

Solid pack chimney with Metal supports

 

as a thimble

13-14

Masonry fireplace

14

Metal prefabricated chimney

15

Mobile home installation

16

Outside air kit installation

17

Blower installation

17

OPERATION

 

Over-firing your appliance

18

Burning process

18

Air controls

19

Heat output setting

20

Building a fire

20

Correct baffle & blanket placement

21

Opacity

22

Burn rates

22

Wood selection and storage

22

Blower operating instructions

22

MAINTENANCE

 

Creosote formation & removal

23

Chimney cleaning

23

Ash removal

23

Glass care & replacement

23-24

Care & cleaning of plated surfaces

24

Door handle assembly & door gasket

24

Brick replacement

25

Baffle removal & installation

25

Service & Maintenance Log

26

EXPLODED VIEWS

27

SERVICE PARTS

28

WARRANTY

30

CONTACT INFORMATION

32

Locating your stove

9

Leg leveling system

9

Side door locking mechanism

9

Reversible flue collar

10

Horizontal heat shield

10

Chimney height requirements & Draft

11

2-10-3 Rule

11

Flue systems

11

7004-187F September 1, 2008

Page 3

Image 3
Contents Yosemite Important Safety Notes007 Yosemite Wood StoveTable of Contents Installation Materials Needed for Your Safety Chimney SystemsVenting System Vent Specifications Front View TOP View Rear VentSide View Side View with Fuel Door 90O Elbow OFF TOP of Stove Through Backwall Double Wall-USAUSA Both Fuel Doors AccessibleFloor Protection Side Fuel Door Locked ShutBoth Fuel Doors ACCESSIBLE- Corner Side Fuel Door Locked Shut CornerHorizontal Venting Locating Your Stove Instructions to Unlock Side Fuel DoorBolt fully extended Reversible Flue Collar Converting Collar for Rear Vent InstallationFlue Systems Chimney Height Requirements DraftMasonry Chimney Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Contd Connection to a Masonry FireplaceInterior Chimney Connection to a Metal Prefabricated ChimneySet off smoke alarms Mobile Home InstallationPart Outside AIR KIT InstallationFire Risk Important Please Read Before Using StoveSymptoms of Over-Firing Operating InstructionsPrimary AIR System AIR ControlsBTU / Hr Start-Up Air Control Primary Control Heat Output SettingsCorrect Baffle & Blanket Placement Incorrect PositionsCorrect Position Blower Operating Instructions OpacityBurn Rates Wood Selection and StorageASH Removal MaintenanceChimney Cleaning CreosoteGlass Care Contd Maintenance ContdGlass Replacement Care and Cleaning Plated Surfaces Door Handle AssembliesBaffle Removal & Installation Maintenance Brick Replacement InstructionsYosemite Wood Stove Service & Maintenance Log Yosemite Wood Stove Exploded Views Front Door Assembly Side Door AssemblySKU Service PartsCast Parts Individual Pieces CONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Contd Yosemite Wood Stove

MBK, PMH specifications

Hearth and Home Technologies (HHT) is a well-known name in the hearth industry, renowned for its commitment to innovation and quality in heating solutions. Their PMH and MBK series represent the pinnacle of modern wood-burning appliance technology, designed to meet varying consumer needs while prioritizing performance, efficiency, and environmental responsibility.

One of the standout features of the PMH (Performance Modular Home) line is its ability to blend seamlessly into a variety of home designs. It offers a sleek and contemporary aesthetic, making it a preferred choice for modern home builders. This series prioritizes efficient wood utilization, ensuring that users have a reliable source of sustainable heat. With high-efficiency ratings, the PMH units burn wood more thoroughly, leading to higher heat output with significantly reduced emissions.

Similarly, the MBK (Modular Built Kit) line excels in versatility and efficiency. Designed for modular homes, the MBK series provides a convenient solution for homeowners seeking efficient heating without compromising on style. These units are engineered to be space-saving, making them ideal for smaller living environments while still delivering impressive heat outputs. Their modular design allows for easy installation and maintenance, differentiating them from traditional wood stoves.

Both series incorporate advanced combustion technologies, which maximize fuel efficiency and reduce emissions. Features such as secondary combustion systems enhance the burning process, leading to cleaner emissions and lowering the environmental impact of wood heating. This is particularly vital in today’s eco-conscious market, where sustainability is a key consideration for consumers.

The HHT PMH and MBK series are equipped with various customization options, allowing homeowners to tailor their heating solutions to their specific requirements. Choices include different finishes, sizes, and control options, enabling users to create a hearth experience that aligns with their tastes and home decor.

In conclusion, Hearth and Home Technologies’ PMH and MBK series stand out for their blend of style, efficiency, and advanced technology. They not only provide reliable heating solutions but do so in a manner that respects the environment and meets the modern consumer’s desire for both functionality and design. For those seeking top-tier wood-burning technology, HHT’s offerings present a compelling choice worth considering.