Hearth and Home Technologies CFL-24LP-C, CFL-24NG-IPI, CFL-18NG-C Intellifire Ignition System

Page 14

B. Intellifire Ignition System

Symptom

Possible Cause

Corrective Action

 

 

 

1. Pilot won’t light.

a. Incorrect wiring.

Verify “S” wire (white) for sensor and “I” wire (orange) for ignitor

The ignitor/module

 

are connected to correct terminals on module and pilot assembly.

makes noise, but no

 

 

b. Loose connections or electrical

Verify no loose connections or electrical shorts in wiring from

spark.

 

shorts in the wiring.

module to pilot assembly. Verify connections underneath pilot as-

 

 

sembly are tight; also verify connections are not grounding out to

 

 

metal chassis, pilot burner, pilot enclosure, mesh screen if present,

 

 

or any other metal object.

 

 

 

 

c. Ignitor gap is too large.

Verify gap of igniter to right side of pilot hood. The gap should be

 

 

approximately .17 in. or 1/8 in. (3 mm).

 

 

 

 

d. Module.

Turn ON/OFF rocker switch or wall switch to OFF position. Remove

 

 

ignitor wire “I” from module. Place a grounded wire about 3/16 in. (5

 

 

mm) away from “I” terminal on module. Place ON/OFF rocker switch

 

 

or wall switch in ON position. If there is no spark at “I” terminal

 

 

module must be replaced. If there is a spark at “I” terminal, module

 

 

is fine. Inspect pilot assembly for shorted sparker wire or cracked

 

 

insulator around electrode. Replace pilot if necessary.

 

 

 

2. Pilot won’t light,

a. No power.

Check batteries.

there is no noise or

 

 

spark.

 

 

 

 

 

 

b. A shorted or loose connection in

Remove and reinstall the wiring harness that plugs into module.

 

wiring configuration or wiring har-

Verify there is a tight fit. Verify pilot assembly wiring to module. Re-

 

ness.

move and verify continuity of each wire in wiring harness. Replace

 

 

any damaged components.

 

 

 

 

c. Improper wall switch wiring.

Check wiring connections.

 

 

 

 

d. Module not grounded.

Verify black ground wire from module wire harness is grounded to

 

 

metal chassis of appliance.

 

 

 

 

e. Module.

Turn ON/OFF rocker switch or wall switch to OFF position. Re-

 

 

move ignitor wire “I” from module. Place ON/OFF rocker switch

 

 

or wall switch in ON position. If there is no spark at “I” terminal

 

 

module must be replaced. If there is a spark at “I” terminal, module

 

 

is fine. Inspect pilot assembly for shorted sparker wire or cracked

 

 

insulator around electrode.

 

 

 

3. Pilot sparks, but

a. Gas supply.

Verify that incoming gas line ball valve is “open”. Verify that inlet

Pilot will not light.

 

pressure reading is within acceptable limits, inlet pressure must

 

 

not exceed 14 in. W.C.

 

 

 

 

b. Ignitor gap is incorrect.

Verify that spark gap from ignitor to pilot hood is .17 in. or 1/8 in (3 mm).

 

 

 

 

c. Module is not grounded.

Verify module is securely grounded to metal chassis of appliance.

 

 

 

 

d. Module voltage output / Valve/Pilot

Verify battery voltage is at least 2.7 volts. Replace batteries if volt-

 

solenoid ohms readings.

age is below 2.7.

 

 

 

14

Heat & Glo • CFL-18/24/30-C, CFL-24-IPI, ST-CFL-24-B • 526-910 Rev. E • 10/08

Page 13 Page 15
Image 14
Page 13 Page 15
Contents What to do if you smell gas Do not Discard this ManualCongratulations Homeowner Reference InformationTable of Contents Appliance Certification High Altitude InstallationIntroduction Minimum Fireplace Size Installation Getting StartedAny such action may cause a fire hazard Protective Heat Shield Before Lighting Appliance Operating Guidelines and Maintenance InstructionsMaintenance Lighting Instructions IPI Final inspection byFor Your Safety Read Before Lighting Instructions Lighting Instructions Standing PilotTroubleshooting Standing Pilot Ignition SystemTroubleshooting Symptom Possible Cause Corrective ActionIntellifire Ignition System Remove any contaminants that may have accumulated on Reference Materials Log Set AssemblyService Parts Part number list on followingAt Depot Service Parts ListStocked CFL-24NG-IPI, CFL-24LP-IPI CFL-24NG-IPI, CFL-24LP-IPI CFL-24NG-C, CFL-24LP-C CFL-24NG-C, CFL-24LP-C CFL-30NG-C, CFL-30LP-C CFL-30NG-C, CFL-30LP-C ST-CFL-24NG-B, ST-CFL-24LP-B Stocked CONDITIONS, Exclusions & Limitation of Liability Limited Lifetime Warranty Contact Information

CFL-18LP-C, CFL-24NG-IPI, CFL-24NG-C, CFL-18NG-C, ST-CFL-24NG-B specifications

Hearth and Home Technologies (HHT) has long been a leader in the hearth industry, and their line of gas fireplaces is a testament to their commitment to innovation, quality, and user satisfaction. Among their notable products are the CFL-24LP-IPI, CFL-30LP-C, ST-CFL-24LP-B, CFL-24LP-C, and CFL-30NG-C models, which offer a wide array of features designed to enhance warmth and ambiance in any living space.

One of the standout features across these models is the innovative "Intermittent Pilot Ignition" (IPI) technology found in the CFL-24LP-IPI. This system allows for greater energy efficiency by igniting the burner only when the fireplace is in use, reducing gas consumption and saving on utility bills. This energy-efficient design is complemented by a range of realistic flame effects that can be adjusted to suit user preferences, bringing the allure of a traditional wood fire into a modern gas appliance.

The CFL-30LP-C and CFL-30NG-C models target larger spaces with enhanced heating capacity and design flexibility. With their impressive dimensions, these units can effectively serve as the focal point of a room while providing ample warmth to larger areas. Featuring a variety of trim and finish options, they easily match diverse interior styles, from contemporary to classic.

Another significant aspect of these models is their user-friendly controls. Many units come equipped with remote control functionality, allowing users to adjust flame height and temperature settings without leaving their seats. This convenience is further amplified by the installation of a thermostat mode that helps maintain a consistent room temperature, enhancing overall comfort.

The ST-CFL-24LP-B and CFL-24LP-C models emphasize size without compromising style or performance. These compact options are perfect for smaller spaces, yet still deliver robust heating capabilities and the elegant aesthetics associated with Hearth and Home Technologies.

All these models adhere to high safety standards and include features such as automatic shut-off valves and glass doors to prevent accidental contact with the flame. Additionally, they are designed for easy maintenance and service, ensuring longevity and consistent performance.

In conclusion, Hearth and Home Technologies’ gas fireplace range brings together efficiency, style, and advanced technology. With models like the CFL-24LP-IPI, CFL-30LP-C, ST-CFL-24LP-B, CFL-24LP-C, and CFL-30NG-C, homeowners can achieve a cozier atmosphere while enjoying the benefits of modern engineering. Whether for a contemporary or traditional setting, these fireplaces deliver on both form and function.
Top Page Image Contents