Attic Insulation Shield | Hearth and Home Technologies BC36C

BC36C/BC36R INSTALLATION INSTRUCTIONS

6.Attic Insulation Shield

An insulation shield should be installed when there is a possibility of insulation coming into contact with the factory built chimney system.

a.Bend the tabs at the top of the attic insulation shield inward. This will help keep the chimney section centered in the shield.

b.Position the shield over the vertical chimney section where it penetrates a firestop spacer.

c.Slide the shield down until it rests on the firestop spacer. The firestop spacer will support the insulation shield. See Figure 12.

Figure 12 - Installing an Attic Insulation Shield

WARNING! RISK OF FIRE.

Do not fill the space between the chimney sec- tion and the insulation shield with insulation.

7.Double-check the Chimney Assembly

Continue assembling the chimney sections up through the firestop spacers as needed. While doing so, be aware of the height and unsupported chimney length limitations that are given on page 12 under “Chimney Requirements”.

Check each section by pulling up slightly from the top to ensure proper engagement before installing the succeeding sections. If they have been connected correctly, they will not disengage when tested.

CAUTION:

Inner flue and outer liner sections cannot be disassembled once locked together. Plan ahead to ensure the proper installation height is achieved with the selected chimney compo- nents.

8.Secure the Chimney System

When offsets and returns are joined to straight pipe sections, they must be locked into position with the screws provided (outer only), using the predrilled holes. To prevent gravity from pulling the chimney sections apart, the returns and the chimney stabilizers have straps for securing these parts to joists or rafters. See Figure 13.

Note: You must provide support for the pipe dur- ing construction and check to be sure inadvertent loading has not dislodged the chimney section from the fireplace or at any chimney joint.

Figure 13 - Offset/Return with Stabilizer

WARNING!

When chimney sections exceeding 6 ft in length are installed between an offset and return, structural support must be provided to reduce off-center loading and prevent chimney sections from separating at the chimney joints.

WARNING!

Maintain a minimum of 2 in. air clearance to all parts of the chimney system at all times! Fail- ure to maintain this 2 in. air clearance will cause a structure fire.

08/04

34962 Rev G

BC36C specifications

The Hearth and Home Technologies BC36C is a premium gas fireplace that seamlessly blends comfort, efficiency, and aesthetic appeal. Ideal for residential spaces, this model enhances the ambiance of any room while providing a reliable source of warmth. Its design emphasizes both modern aesthetics and advanced functionality, making it a popular choice among homeowners and interior designers alike.

One of the standout features of the BC36C is its impressive heating capability. With a heat output of up to 30,000 BTUs, this fireplace efficiently warms large areas, ensuring that your space remains cozy even on the coldest nights. The unit’s advanced venting system allows for flexible installation options, whether you prefer traditional venting or direct venting through an exterior wall.

The BC36C is designed with an adjustable flame control feature, allowing users to customize the intensity of the fire to suit their mood or specific heating needs. This not only enhances the user experience but also contributes to energy efficiency. The glass viewing area is expansive, providing an unobstructed view of the flames, while the clean face design minimizes distractions and frames the fire beautifully.

Moreover, the incorporation of advanced technologies such as ProFlame and Eco-Boost systems elevates the fireplace’s performance. The ProFlame technology ensures consistent operation, while the Eco-Boost feature enhances heat output without compromising efficiency. The unit is equipped with a reliable remote control system, granting homeowners the convenience of adjusting settings from across the room.

The BC36C also takes safety seriously. It includes features like the automatic shut-off function and a safety barrier screen, providing peace of mind for families with children or pets. Additionally, the unit’s high-quality construction materials ensure durability and longevity, making it a worthwhile investment for any homeowner.

In terms of aesthetic options, the BC36C comes with various decorative choices, including different media types such as decorative logs, crystals, or stones, allowing you to personalize the look of your fireplace. This versatility ensures that the fireplace complements your interior design style, turning it into a centerpiece of your living space.

In conclusion, the Hearth and Home Technologies BC36C gas fireplace combines cutting-edge technology, efficient heating, and a beautiful design, making it a top choice for anyone looking to add warmth and elegance to their home. With features that prioritize safety, efficiency, and user customization, this fireplace represents a perfect blend of functionality and style.