Hearth and Home Technologies BC36C specs

BC36C/BC36R INSTALLATION INSTRUCTIONS

DESIGN AND INSTALLATION CONSIDERATIONS

When selecting a location for your woodburning fireplace, it is important to evaluate a number of considerations. Modern construction techniques can create conditions that may not allow your chimney to draft properly. This may result in smoke spillage from your fireplace, as well as cause other combustion appliances to operate incorrectly.

Tightly sealed construction is important for energy efficiency. Unfortunately, a great deal of effort has been directed to tightening up sidewall construction, while considerably less attention has been paid to tightening upper portions of the warm air envelope (insulated ceilings). This has increased the “Stack Effect”, a condition that increases the negative pressure generated by the structure. This negative pressure will directly affect the drafting performance of a fireplace chimney. To minimize the negative pressure generated by stack effect, make certain that all ductwork installed in the attic spaces is sealed airtight. Minimize the number of recessed light fixtures installed in the insulated ceiling, and use sealed recessed light fixtures. Finally, make certain the whole house fans and attic access panels are tightly sealed. These are important design considerations that must be observed during the design and construction stage of the home.

If you desire to put a fireplace in your basement, we recommend that you consider a direct vent gas fireplace. Basements always have a significant negative air pressure that causes the fireplace system to be more susceptible to smoke spillage and cold flue backdrafting. Since direct vent gas fireplaces are sealed, they are not affected by the negative pressure that exists in basements.

Finally, woodburning fireplaces perform best when their chimney (roof termination) is located on the upper half of the roof, especially when cathedral ceilings are present. Chimneys that are located on the lower half of the roof realize what is known as “lazy flue” and will not draft as well as a chimney that is located in the upper portion of the roof. The reason for this is that the stack effect generated by the overall height of the living spaces inside the house will exceed the draft generated by the chimney system. If you desire to place a woodburning fireplace in a location where the termination cap would be located on the lower half of a roof, such as on an outside wall at the base of a cathedral ceiling, we recommend that you consider using a direct vent gas fireplace. This will assure the homeowner a fireplace that operates correctly.

These properties do not affect just your woodburning factory-built fireplace. They can cause any woodburning fireplace as well as any conventionally vented (B-vent) gas appliance to operate improperly. Careful planning at this stage of your project will ensure satisfaction with the operation of your fireplace once it is completed.

08/04

34962 Rev G

BC36C specifications

The Hearth and Home Technologies BC36C is a premium gas fireplace that seamlessly blends comfort, efficiency, and aesthetic appeal. Ideal for residential spaces, this model enhances the ambiance of any room while providing a reliable source of warmth. Its design emphasizes both modern aesthetics and advanced functionality, making it a popular choice among homeowners and interior designers alike.

One of the standout features of the BC36C is its impressive heating capability. With a heat output of up to 30,000 BTUs, this fireplace efficiently warms large areas, ensuring that your space remains cozy even on the coldest nights. The unit’s advanced venting system allows for flexible installation options, whether you prefer traditional venting or direct venting through an exterior wall.

The BC36C is designed with an adjustable flame control feature, allowing users to customize the intensity of the fire to suit their mood or specific heating needs. This not only enhances the user experience but also contributes to energy efficiency. The glass viewing area is expansive, providing an unobstructed view of the flames, while the clean face design minimizes distractions and frames the fire beautifully.

Moreover, the incorporation of advanced technologies such as ProFlame and Eco-Boost systems elevates the fireplace’s performance. The ProFlame technology ensures consistent operation, while the Eco-Boost feature enhances heat output without compromising efficiency. The unit is equipped with a reliable remote control system, granting homeowners the convenience of adjusting settings from across the room.

The BC36C also takes safety seriously. It includes features like the automatic shut-off function and a safety barrier screen, providing peace of mind for families with children or pets. Additionally, the unit’s high-quality construction materials ensure durability and longevity, making it a worthwhile investment for any homeowner.

In terms of aesthetic options, the BC36C comes with various decorative choices, including different media types such as decorative logs, crystals, or stones, allowing you to personalize the look of your fireplace. This versatility ensures that the fireplace complements your interior design style, turning it into a centerpiece of your living space.

In conclusion, the Hearth and Home Technologies BC36C gas fireplace combines cutting-edge technology, efficient heating, and a beautiful design, making it a top choice for anyone looking to add warmth and elegance to their home. With features that prioritize safety, efficiency, and user customization, this fireplace represents a perfect blend of functionality and style.