Unloading and Unpacking

Figure 12 Location of serial and model number plate (cabinet side panel removed and open door)

Manuals

Serial Number

and Model

Number Plates

3.3Positioning the Liebert FS

3.3.1Moving the Liebert FS

When moving the unit a short distance, the Liebert FS may be rolled on its built-in casters (see Figure 13) to its location.

! CAUTION

Before moving the Liebert FS across a floor, determine whether the surface will support the unit’s weight—1,462 lb. (663kg) as shipped; 1,300 lb. (590kg) uncrated.

Figure 13 Liebert FS cabinet caster location

Casters on each corner (for moving unit short distances only)

When moving the unit a longer distance or over rough flooring, move the Liebert FS with a forklift or similar equipment to facilitate the relocation and to reduce vibration of the unit.

! CAUTION

Ensure that the handling equipment is rated for the weight of the Liebert FS—1,462 lb. (663kg) as shipped; 1,300 lb. (590kg) uncrated.

3.3.2Storing the Liebert FS for Delayed Installation

If the equipment will not be installed immediately, it must be stored indoors where the temperature stays within -4°F to 176°F (-20°C to 80°C) and the humidity is no higher than 95% (non-condensing).

16

DISCONTINUED

 

PRODUCT

Page 28
Image 28
Emerson 540VDC manual Positioning the Liebert FS, Moving the Liebert FS, Storing the Liebert FS for Delayed Installation