Emerson 540VDC Appendix B.2.3 Accessing the DCM, Appendix B.2.4 Configuring DCM System Parameters

Data Collection Module

Appendix B.2.3 Accessing the DCM

From a personal computer connected to the same network as the DCM, enter the IP Address of the DCM, assigned by the LAN network server or manually configured, into the address line of the Inter- net browser to gain access to the DCM as seen in Figure 111.

Figure 111 DCM screen

Enter IP

Address

The DCM software has a screen menu bar along the top of the page. Three screens may be accessed: STATUS, SETUP and DATAFILES. The screens allow for setup of the DCM and different ways to browse the data recorded by the DCM.

Appendix B.2.4 Configuring DCM System Parameters

One of the tabs in the menu bar is the DCM system “Setup” page. This page will allow you to custom- ize your DCM settings. For example, you may want to assign a static IP Address to the DCM. There are seven fields on the Setup page as seen in Figure 112. Enter data in the fields and once you are done with entries, click the Submit button to enter changes or click Reset to reset the DCM.

The default Username and Password for setup are “hello” and “hello” respectively. Liebert recom- mends changing both the username and password to prevent unauthorized changes to the system.

Figure 112DCM setup screen

103	DISCONTINUED
	PRODUCT