Emerson 540VDC manual Home Done

Data Collection Module

To view the Network settings return to the View menu and press number 6 “Network”. The Network view screen displays the network addresses coming from the DCM. Static address settings can be entered using the keypad into this screen. The Network screen will show the assigned IP Address, Default Gateway, Subnet Mask and DNS Server.

Figure 108 Networks view

>>	DHCP:	ON
>>	IP ADDRESS:	192.168.1.155
>>	NET MASK:	255.255.255.0
>>	DEFAULT GATEWAY:	192.168.1.1
>>	DNS SERVER:	192.168.1.13
		HOME	DONE

By entering a Password to access the User or Service level mode you can edit this function. Pressing the EDIT button, F1, will place the system in the edit mode. The DHCP must be disabled or turned Off to proceed with setting IP addresses and other settings. After pressing EDIT you will see up/down arrows next to the DHCP On value. Pressing the up or down arrows on the keypad will allow you to turn this function Off or On.

Figure 109 Networks view, turn off DHCP

>>	DHCP:	ON
>>	IP ADDRESS:	192.168.1.155
>>	NET MASK:	255.255.255.0
>>	DEFAULT GATEWAY:	192.168.1.1
>>	DNS SERVER:	192.168.1.13
EDIT		HOME	DONE

Once you have turned DHCP OFF, press EDIT again and now you will see numbers next to each of the settings. Pressing the corresponding number will allow you to enter or change that value. At any time you may press CANCEL to cancel the changes, once changes or entries are complete, press APPLY to complete entry process. Pressing APPLY will reboot system and in a few minutes the sys- tem will display the new screen.

Figure 110 Networks view, edit settings (service level)

1.	DHCP:	OFF
2.	IP ADDRESS:	192.168.1.155
3.	NET MASK:	255.255.255.0
4.	DEFAULT GATEWAY:	192.168.1.1
5.	DNS SERVER:	192.168.1.13
CANCEL		HOME	APPLY

102	DISCONTINUED
	PRODUCT