
Operation
6.0OPERATION
6.1Operator Controls
The Liebert FS uses a Control Panel as the primary means for an operator to interface with the sys- tem. The Control Panel enables the operator to perform the following tasks:
Initial setup and adjustments to programmable parameters (access limited by Security Access function):
•Set the Liebert FS Control Parameters
•Configure Liebert FS for operation with external equipment
Initial setup and adjustments to Security Access functions
•Set pass codes and access levels
Execute operational procedures:
•Startup and shutdown of the Liebert FS.
Quick view of operational status:
•View current Mode of Operation
•View current Status
Access System Status reports:
•Check temperatures and voltages
•Check vital system health indicators
Access System History
•Check number of discharges
•Check for total hours of operation
•Check for warnings and faults history
Monitor the power flow between the Liebert FS and a UPS and other Liebert FS meter readings:
•Monitor power flow from Liebert FS to the UPS DC Bus or from UPS to the Liebert FS
•Monitor Liebert FS State of Charge
•Monitor DC Bus Voltage
•Determine if the critical load is being supplied power from the Liebert FS
•Monitor charging after discharge
52 | DISCONTINUED |
| PRODUCT |