
UPS Interconnection Kits
APPENDIX A.0UPS INTERCONNECTION KITS
Your Liebert FS is equipped with a UPS interconnection kit to connect it to one of these Liebert UPS systems:
•Liebert Series 610™, 600T™ or 600™
•Liebert Npower™
•Liebert Series 300™
•Liebert HiPulse™
The Liebert FS system must be installed according to the instructions in 4.0 - Installation. Integrate your Liebert FS system into an Uninterruptible Power Supply (UPS) system in accordance with the instructions and drawings in this manual.
! CAUTION
The initial system startup must be performed ONLY under the supervision of a
Contact your local Liebert sales representative or Liebert Services at
NOTE
Before beginning installation, ensure that your Liebert FS unit is equipped with the correct UPS interconnection kit.
The first two digits of the Liebert FS model number represent the UPS system the product is designed for, as shown in Table 18.
Table 18 Key to UPS model interconnection
Liebert FS Model # | Use With Liebert UPS |
25FS | Liebert Series 300 |
37FS | Liebert Npower |
39FS | Liebert Series 610/600T/600 |
Contact Liebert | Liebert NXL |
Contact Liebert | Liebert NX |
Contact Liebert | Liebert HiPulse (50Hz European Model) |
Appendix A.1 Wiring Connections
Appendix A.1.1 General Wiring Considerations
! CAUTION
A qualified electrical contractor must perform all electrical connections. The wires (DC power, ground, optional status/control and auxiliary backup power) that connect the Liebert FS system(s) to the UPS system are
The electrical connections to the Liebert FS are:
•DC power
•Status/control
•Ground
•Auxiliary backup power
•Remote monitoring (optional)
NOTE
The connection instructions included in this section address ONLY the cabling of the DC power and Status/Control connections specific to the individual UPS interconnection kits.
Instructions for installing ground, auxiliary backup power and remote monitoring connections are in 4.0 - Installation.
84 | DISCONTINUED |
| PRODUCT |