
Operation
6.4.6Temperatures
MENU>VIEW>TEMPERATURES shows the temperatures of various system parts.
Figure 66 Temperature view
>> ROTOR | 67.12 °C |
|
|
|
>> STATOR | 40.20 °C | >> | CABINET | 35.12°C |
>> IGBT | 52.22 °C | |||
>> PPM | 46.17 °C | >> | 24V PS | 50.34°C |
>> MCM | 38.46 °C |
|
|
|
HELP |
|
|
| DONE |
6.4.7Voltages
MENU>VIEW>VOLTAGES shows the major power supply voltages on the controller board. These values are updated continuously.
NOTE
If an earlier model Liebert FS, serial number P or N, flywheel system has been upgraded with this software, it will display only the 24V power supply voltage.
Figure 67 Figure 5-14. Voltages view
>> 3.3V: | 3.29 V | >> 24V #1: | 24.01 V |
>> 5V: | 5.01 V | >> 24V #2: | 24.00 V |
>>12V: 11.99 V >> 24V BKP: 23.99 V
HOME DONE
6.4.8History
The Liebert FS records and stores a limited history of the following items; CHARGE, DISCHARGE, WARNING, FAULT, VITALS, and COUNTERS which are listed in the main History menu screen. (See Figure 69). In the event list screens, Figures 71 through 73, users may move between pages using the PREV and NEXT buttons. History data can be cleared by RESET button. SERVICE or higher level is required to reset the list.
Figure 68 History view
MENU>VIEW>HISTORY> | 6. COUNTERS |
1. CHARGE |
2.DISCHARGE
3.WARNING
4.FAULT
5.VITALS
HOME DONE
•Charge: The most recent charge (LAST CHARGE) is displayed in time (sec.) and energy (kW) on this screen as are the accumulated charge time/energy (TOTAL CHARGE). (See Figure 69.)
Figure 69 Charge history
>> LAST CHARGE: | 12.34 | sec |
| 56.78 | kW |
>> TOTAL CHARGE: | 12345 | sec |
| 12345678 | kW |
| HOME | DONE |
| 62 | DISCONTINUED |
|
| PRODUCT |