Mounting Tools | Emerson 540VDC specification

Installation

4.1.1Concrete, Masonry or Stone Floor Mounting Mounting Kit for Concrete, Masonry or Stone Floors

Liebert has included a complete anchoring kit with each Liebert FS for surface mounting. The kit is intended to securely fasten the Liebert FS to its intended location for operational safety and seismic requirements.

This kit includes (items depicted in Figure 150):

•Two (2) cabinet mounting brackets (from shipping pallet)

•Four (4) concrete expansion anchors

•Two (2) drop-in hex head anchor bolts

•Two (2) washers for anchor bolts

•One (1) masonry drill bit

•One (1) floor mounting template (Figure 149)

•Two (2) drop-in hex flange anchor bolts

•One (1) setter rod or drive pin (specifically designed for measuring hole depth and for expanding the anchors)

•Four (4) hex bolts from shipping package, each 1/2" diameter and 3/4" long (12.7mm diameter x 20mm long)

Mounting Tools

These tools are needed for the mounting the Liebert FS on the floor:

•Concrete drill with 1/2" (12.7mm) minimum chuck size

•Masonry drill bit (included in mounting kit)

•Masonry drill bit—used for pilot hole—for example, 1/8" (3.2mm) diameter

•Setter rod (included in mounting kit)

•Hammer or mallet, 16 oz. (0.5kg) or larger

•Shop vacuum cleaner (to remove dust from hole when drilling)

•3/4" (19mm) combination wrench

•18mm combination wrench

Concrete, Masonry or Stone Floor Mounting Instructions

To mount the Liebert FS cabinet on the floor:

1.Prepare a clean, level, finished surface, free of obstructions, for installation of the mounting kit.

2.Tape the floor mounting template mounting template (Figure 149) to the installation location.

3.Using a bit smaller than the one provided in the mounting kit, drill a pilot hole at each of the four places marked with an “X” on the template.

4.Remove template and continue with larger drill bit provided.

Figure 17 Floor mounting template layout

16" (406mm)

X	X

Drill 4 holes, each
2" (51mm) deep,
	29-1/2"
with 5/8" masonry bit		(749mm)

XX

Front of Liebert FS

20	DISCONTINUED
	PRODUCT

Image 32

Emerson 540VDC manual Mounting Tools, Concrete, Masonry or Stone Floor Mounting Instructions

Contents

Liebert FS DC Energy Storage System DIS Product Table of Contents System Overview Operation Maintenance Troubleshooting Appendix A.0 UPS Interconnection Kits Appendix B.0 Data Collection Module Appendix D.0 Installation Drawings Appendix E.0 SpecificationsAppendix F.0 Auxiliary Backup AC Power Supply Appendix C.0 Versatile Interface Board Figures Vii Versatile Interface Board mounted in the Liebert FS 110 Tables Product Important Safety Instructions Safety Precautions Safety Considerations General InformationRequesting Assistance from Liebert System information General System Description Liebert FS Liebert FS Unit N DC Bus LoadsLiebert FS Unit Battery N General SpecificationsLiebert FS Unit N Features and Benefits Key Technological FeaturesKey Customer Benefits Applicable Standards and Certification Output Power vs. Ride-Through Time Vbus=540V, Vreg=520V KW-sec delivered GTX model, 520 VDC, with filter Rectifier Utility Static SwitchBypass System Location Environmental Considerations Flooring Requirements Electrical Considerations AC Power Connections Status/Control ConnectionsGrounding Connections Remote Monitoring Connections-Optional 14623 Inspection Before Removal From the TruckUnloading Handling Unpacking Lifting the Liebert FS cabinet Removing the metal support plates Storing the Liebert FS for Delayed Installation Positioning the Liebert FSMoving the Liebert FS Manuals Serial Number Model Number Plates Front Right Side 12-100120-09 TopBottom Internal layout Front Right Side Door open Panel removed Cabinet Floor Mounting Floor Mounting Bracket Mounting Tools Concrete, Masonry or Stone Floor Mounting Instructions Checking hole depth Bolt securing bracket to cabinet 12.7mm Floor to Flange Mounting front bolts-front side of cabinet Bubble level Wood Floor Mounting Wood Floor Mounting PartsWood Floor Mounting Tools Wood Floor Mounting Instructions Raised Floor Mounting Instructions Raised Floor Mounting Raised Floor Mounting KitRaised Floor Mounting Tools Wiring Connections General Wiring ConsiderationsFront Rear Control Communication Access Panel DC and Ground Connections Circuit Breaker Mounting Plate Ground Wire Gauge Tightening Torque Approximate metric Inch Ground ConnectionsTightening torque for ground connection Pounds AC Auxiliary Control Power Supply Connections Service panel location Fused disconnect Terminal Neutral Ground Terminal 2 Line Startup Considerations Remote monitoring DCM connections inside cabinet front door Detailed System Description Liebert FS front view Power Conversion Module System Module DescriptionControl Panel UPS Interconnection Kit Power System Electrical system schematicBattery Input Magnetic Levitation Versatile Interface Board VIB User interfaces Control PanelData Collection Module DCM Igbt Power Conversion Module PCM Magnetic Levitation Module MLM Active Magnetic Levitation Hardware Axial Electromagnet Upper Radial Rotor/Flywheel-Rotating Group Motor Generator Vacuum System Vacuum system operation Temperature Flywheel Sensors Speed Cabinet System SafetyOuter Housing Rotating Group Inner Housing Coolant List of System User-Configurable Parameters Regulation Voltage Delta During Discharge Vreg Delta Max Charge Current Voltage Behavior Current Sink Modes of Operation Vreg delta help screen OFF Mode Standby ModeStartup Mode UPS DC Bus Voltage = Vcharge Voltage ≥ Vcharge Charge ModeReady Mode Following a Liebert FS Discharge Down to SOC = 0% Discharge ModeShutdown Mode Fault Mode Following a User CommandCoast Mode KEY # Mode Description Typical operation modes Maintenance and Reliability Access System History Operator Controls System Status Indicators System Mode IndicatorsControl Panel Control panel keyboard layout refer to Figure Main screen function descriptions System Mode Indicators System Status IndicatorsSystem status indicators Operation modes Disabled UninstalledOther Status Indicators Operative Security Access Menu Tree and Navigation Menu tree System Setup and Parameter Access Navigation and Operation of Control Panel 2V REG View Time/Date History TemperaturesVoltages Fault history, Event list screen Discharge history Options Vitals history view Network-Requires DCM Option Networks view Security ElectricalVitals Password screens About Tools Inspection before Initial System Startup Initial System Startup ProcedureSystem Startup Control Parameters Setup at Initial System Startup Control Parameter Value DefaultControl parameters Software versions Regular Startup Procedure Powering Up the Liebert FSBooting Up Inspection Before Regular Startup Shutdown Procedure Validation of Control Parameters SetupInitiating Liebert FS Startup Sequence Liebert FS Startup Sequence Safety Precautions Liebert Services Routine Maintenance Maintenance Schedule Maintenance scheduleFrequency Service Every Item/Action Yrs Record Log Torque specifications unless otherwise labeled Optional Air FiltersTorque Requirements Detecting Trouble Reporting a Problem Corrective ActionsRecommended Test Equipment Limited Life Components General User level menu Ore information Button F5 Meaning / Possible Causes Troubleshooting Label Auxpower Ore information Fault Clear Button F3 Button F5 FaultsBus Power Faults-causes and responses BUS Current Offset Troubleshooting Fault Label Troubleshooting Action Appendix A.1 Wiring Connections Appendix A.1.1 General Wiring ConsiderationsKey to UPS model interconnection Liebert FS Model # Use With Liebert UPS Rear Top view of Liebert FS Cabinet with UPS interconnection kit Liebert FS Positive Terminal Negative Appendix A.1.2 DC Power ConnectionsCircuit Breaker Torque Liebert Series 610/600T/600 model ratings UPS Output Rating KVA Yellow Blue Two rows Row for Liebert FS Software Control Parameter settings Liebert FS Software Control Parameter Setting Liebert Npower model ratings Liebert FS Npower UPSOutput Rating See Table Liebert FS Software Setting Control ParameterLiebert FS Software Control Parameters Product List of Liebert Series 300 models ratings Liebert Series 300 UPS Liebert Series 300 status/control terminal block wiring 395VDC Appendix A.5.1 Description-HiPulse UPS Interconnection Kit Liebert HiPulse model ratings Appendix A.5.3 IKIT-A05 DC Power Connections Liebert FS positive terminal Liebert FS negative terminal Appendix A.5.5 Single Liebert FS on UPS DC Bus UPS Output Rating kVA 120 Multiple Liebert FS Parallel Operation-Regular Configuration Appendix B.2 DCM Installation and Configuration Appendix B.1.2 FeaturesAppendix B.2.1 Installation Appendix B.1 General Information LAN Connection Power Connection Appendix B.2.2 DCM Requirements Home Done Enter IP Address Appendix B.2.3 Accessing the DCMAppendix B.2.4 Configuring DCM System Parameters Appendix B.3.2 Status and Detailed Status Screens Appendix B.3 DCM OperationAppendix B.3.1 Logging into the DCM Appendix B.3.3 Datafiles Screen Datafiles screen Appendix B.4 DCM Troubleshooting Appendix B.4.1 DCM Troubleshooting PrinciplesAppendix B.4.2 Resetting the DCM Troubleshooting Appendix C.1 General Information-Versatile Interface Board Appendix C.1.1 Versatile Interface Board Overview Appendix C.1.2 VIB Features VIB I/O functions Interface VIB Designation Description X20 Label Appendix C.2 VIB Installation and Configuration Appendix C.2.1 VIB InstallationAppendix C.2.3 VIB Input Specifications Appendix C.2.4 VIB Output Specifications Appendix C.3 VIB Operation Appendix C.4 Troubleshooting the VIB Appendix C.4.2 VIB in Disabled or Not Available StateAppendix C.4.1 UIB State Not Displayed on the Front Panel Appendix C.4.3 Inputs Not Recognized Submittal documents accompanying Liebert FS Storage Solution Flywheel Storage SolutionAppendix D.1 Liebert FS Flywheel Submittal Document Matrix No UVR, circuit breaker to terminal block wiring Appendix D.2 Other Liebert FS Drawings Electrical connections Electrical system block diagram 24 UVR, circuit breaker to terminal block wiring 48 UVR, circuit breaker to terminal block wiring Outline drawing, Liebert FS cabinet Fused Liebert FS Control FS cabinet to Liebert Series 610 UPS module Metal Support Elevation drawing-Liebert FS cabinet Front 124 NEG Weight 1300 lb .6kg Mechanical NEG POS GND FS systems in parallel configuration Line drawing, three Liebert + GND Breaker With Liebert UPS Liebert UPS Module + GND Parallel with a With factory-integrated circuit Liebert UPS Module Liebert UPS Module Wiring, multiple units Status/control Wiring specifications, Liebert FS and Liebert Series Wiring specifications, Liebert FS and Liebert Npower Wiring specifications, Liebert FS and Liebert Series 140 29-1/2 749mm Bolts and Washers come with cabinet Drill Template Dwg Liebert FS block diagram Power line diagram Unit N Input Bus Liebert FS Cabinet Unit NLiebert FS Cabinet UPS cable entry-top Unit N Input TOP View Appendix E.0 Specifications Technical specifications Appendix E.1 Ground Test Procedure Items Required Appendix F.2 Backup AC Power Supply Specification Appendix F.3 Recommended Backup Power Supply ConfigurationAppendix F.1 Overview Frequency 50 to 60Hz Grid Battery Liebert FS PackGrid supply DC bus Appendix F.3.2 Operating the Liebert FS Without Batteries Appendix F.4 Scenarios Liebert FS Flywheel module 154 DIS Product Locations