Model 10A11-1, Rev C

Two-Way Audio/Voice Alarm Module

DESCRIPTION

The Model 10A11-1, Rev C Two-Way Audio/Voice Alarm Module allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging. The Model 10A11-1, Rev C also provides a line-level audio output that can be tied into an amplifier or whole home audio system, and a page output that is activated whenever the Model 10A11-1, Rev C generates audio output.

FEATURES

•Two independent audio amplifiers

•Two microphone inputs

•Line-level audio output (3.5mm jack)

•Page output (contact closure)

•Automatic gain control (AGC) for talk and listen

•Two-way or listen-only operation

•Control via standard Touch-Tone phone

•Connects to HAI Speaker/Microphone Modules and/or Omni Consoles and Lumina Keypads with Built-in Speaker/Microphone

•Connects to Hi-Fi by HAI and other whole home audio distribution systems for announcing voice messages and paging

INSTALLATION

Connect 8-ohm speaker(s) and two-wire electret microphone(s) to the Model 10A11-1, Rev C - See Figure 1. HAI Model 28A00-1 (Surface) or Model 28A00-2 (Flush) Speaker/Microphone Modules and/or Model 33A00-4 Omni Consoles and Model 33A00-20 Lumina Keypads with Built-in Speaker/Microphone can be used.

NOTE: Do not mount speakers, microphones, 28A00 modules, 33A00-4 consoles, or 33A00-20 keypads near any device that may produce noise (fans, air conditioning units, audio speakers, etc.).

Microphones:

Microphones should be connected with 24 AWG or larger, shielded twisted pair wire. Wire length should not exceed 100 feet. Connect the cable shields and negative wires together at the Model 10A11-1, Rev C terminal block only. Do not connect the shield on the microphone end. Additional microphones can be connected to each input in parallel.

Speakers:

Speakers should be connected with 18 AWG or larger, twisted pair wire. For wire runs that exceed 50 feet, use 16 AWG wire or larger. Wire length should not exceed 100 feet. Additional speakers can be connected to each output in series.

Line-Level Audio Output:

A power amplifier may be connected to the line-level audio output using a 3.5mm patch cable. This is typically used to annunciate the audio output from the Model 10A11-1, Rev C throughout a home when used with a whole home audio distribution system.

Page Output:

The page output provides a contact closure whenever the Model 10A11-1, Rev C generates audio. This is typically used to trigger the paging feature of a whole home audio distribution system.

Home Automation, Inc.

New Orleans, LA • Phone 800-229-7256 • Fax 504-736-9290

Page 2
Page 1
Image 1
Home Automation 10A11-1 manual Description, Features, Installation
Page 2

10A11-1 specifications

Home automation has taken a significant leap forward with the introduction of systems like Home Automation 10A11-1. This advanced solution is designed to enhance convenience, energy efficiency, and security in residential settings. It integrates seamlessly into daily life, allowing homeowners to control various aspects of their homes through a centralized system.

One of the main features of Home Automation 10A11-1 is its compatibility with a wide range of devices. Whether it’s smart lighting, thermostats, cameras, or locks, this system is designed to work with existing technology, providing flexibility and ease of integration. The ability to manage these devices from a single platform simplifies user experience, making sophisticated automation accessible even for those who are not tech-savvy.

The core technology behind Home Automation 10A11-1 is its use of wireless communication protocols such as Wi-Fi, Zigbee, and Z-Wave. These protocols ensure that devices communicate efficiently and reliably, enabling real-time monitoring and control. Homeowners can adjust settings remotely via smartphones or tablets, providing unprecedented control over their living environment from virtually anywhere.

Another notable characteristic of the Home Automation 10A11-1 system is its focus on energy efficiency. By automating heating, cooling, and lighting, homeowners can significantly reduce energy consumption. For instance, smart thermostats can learn user preferences and adjust temperatures accordingly, while smart lighting can turn off when no one is in a room. This not only reduces energy bills but also contributes to a more sustainable lifestyle.

Security is another paramount feature of the Home Automation 10A11-1. The system can integrate with smart surveillance cameras and motion detectors, providing real-time alerts and remote monitoring capabilities. Homeowners can easily check on their property through live feeds and receive notifications when unusual activities are detected, ensuring peace of mind whether they are at home or away.

User-friendliness is at the heart of the 10A11-1 system. It often comes with an intuitive interface that allows customization and easy access to various features. Voice control compatibility with virtual assistants such as Amazon Alexa and Google Assistant further enhances its functionality, making it easier for users to manage their homes.

In summary, Home Automation 10A11-1 represents a significant advancement in residential technology. With its robust integration capabilities, energy-efficient features, and emphasis on security, it offers a comprehensive solution for modern living. As more homeowners embrace such systems, the future of smart homes looks promising and filled with possibilities.
Top Page Image Contents