iMac (27-inch, Mid 2010) Take Apart — Rear Housing 268
2010-09-09
3 Remove foil tape and
gaskets. Examine
plastic tabs under foil
tape. Notice that
some tabs go on the
outside surface and
some on inside
surface of the drive.
4 Remove 4 bezel
screws, 2 on each
side.
5 Remove old bezel
and install new bezel,
taking care that tabs
are properly aligned.
6 Reinstall 4 screws.
7 Apply new foil
tape and 2 gaskets
(included with new
bezel kit) as shown.
8 Once computer is
fully reassembled, test
optical drive (inject,
read, eject) before
returning to customer.