Removal

Note: Glass panel is held in place by magnets.

Caution: Unlike previous model iMacs, the glass panel has tabs along bottom that align with rear housing. Be careful not to damage tabs when removing glass panel.

Apple strongly recommends wearing clean, lint-free gloves whenever handling the glass panel, to reduce cleaning required on reassembly.

1The glass panel can be removed in various ways:

Lay computer on its back and press clean suction cups in opposite corners on glass panel, or...

Lay computer on its back and press clean suction cups in top right and left corners on glass panel, or...

Stand computer upright and use your finger nails to pull glass forward along top edge

2Lift glass panel off the magnets.

2010-09-09

iMac (27-inch, Mid 2010) Take Apart — Glass Panel  140

Page 140
Image 140
Apple MD094LL/A manual Removal