Removal

1Untuck tabs in the memory compartment.

2Pull tab to eject the installed memory module.

Reassembly

1Orient notch on memory with notch in the memory compartment.

2Press memory firmly into slot until you hear a click.

3Tuck black plastic tabs into memory compartment.

4Replace access door and tighten 3 screws.

Important: To ensure proper cooling, the iMac should not be operated without access door installed.

Note: i5 and i7 Quad Core iMac computers come with both top memory slots populated. These computers will not start up if only a single DIMM is installed in any bottom slot; these computers should operate normally with a single DIMM installed in any top slot. Core Duo iMac computers should operate normally with a single DIMM installed in any slot, top or bottom. (“Top” and “bottom” slots refer to the orientation of the slots in the pictures above. “Top” refers to the slots closest to the display;“bottom” refers to the slots closest to the stand).

2010-09-09

iMac (27-inch, Mid 2010) Take Apart — Memory  138

Page 138
Image 138
Apple MD094LL/A manual Reassembly