![](/images/new-backgrounds/1120963/12096327x1.webp)
8.Make note of the cable routing and carefully dislodge the
9.Pull on the display cable
10.If applicable, remove the camera cable connector from the system board.
1 | M2.5 x | 2 | camera cable connector (optional) |
| screws (2) |
|
|
|
|
|
|
3 | display cable pull- | 4 | |
| tab |
| of the computer) |
|
|
|
|
11. Remove the display assembly from the computer base.
Replacing the Display Assembly
1.If applicable, replace the camera cable.
2.Reconnect the display cable to the connector on the system board.
3.Make note of the cable routing and carefully slide the
4.Replace the two M2.5 x