Dell M1330 manual Removing the Coin-Cell Battery

Back to Contents Page

Coin-Cell Battery

Dell™ XPS™ M1330 Service Manual

Removing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.

Removing the Coin-Cell Battery

1.Follow the procedures in Before You Begin.

2.Turn the computer over.

3.Turn the computer over and loosen the three captive screws along with the M2.5 x 5-mm screw. Remove the module cover.

1 M2.5 x 5-mm screw 2 captive screws (3)

3module cover

4.Disconnect the coin-cell battery cable from the system board.

1 coin-cell battery 2 cable connector

5. Slide the coin-cell battery from under the antenna cables and remove the battery from the computer.