Dell M1330 Processor Thermal-Cooling Assembly

Back to Contents Page
 Processor Thermal-Cooling Assembly
Dell™XPS™M1330ServiceManual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly


1. Follow the instructions in Before You Begin.

2. Turn the computer upside down and loosen the three captive screws along with the M2.5 x 5-mm screw. Remove the module cover.

3. Loosen the five captive screws from the thermal-cooling assembly.

4. Remove the fan connector from the system board.

CAUTION: Before working inside your computer, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
M2.5 x 5-mm screw
2
captive screws (3)
3
module cover


1
fan connector
2
thermal-cooling assembly
3
captive screws (5)


NOTE: The fan is a part of the thermal-cooling assembly.