Apple MD094LL/A manual IMac 27-inch, Mid 2010 Take Apart Logic Board

3Transfer:

•memory (install after logic board is in place)

•video card

•optical, HDD, & SSD data cables

4Apply new Ethernet ID label (included in box with new logic board) to bottom of stand.

5Use the Blank Board Serializer tool to set computer’s serial number on new logic board.

6Note: You can install the logic board with the computer positioned as shown or with the computer standing upright.

Important: Make sure the memory modules are removed for installation and no cables are trapped between the logic board and rear housing.

2010-09-09 iMac (27-inch, Mid 2010) Take Apart — Logic Board  211