Removal

1Remove 8 T10 screws: 922-9246

Reassembly Note:

Do not overtighten LCD screws, which could cause light leakage after unit is reassembled.

2With computer standing up and facing you, pull the LCD forward slightly from the top edge to access 4 cables inside.

CAUTION: Tilt display out no more than 4 inches (10 cm). Pulling display too far could damage panel cables or connectors.

2010-09-09

iMac (27-inch, Mid 2010) Take Apart — LCD Panel  148

Page 148
Image 148
Apple MD094LL/A manual Remove 8 T10 screws, Reassembly Note